Sony CTR-K790 Operating Instructions Manual Download

Page: 28 / 60

Watching a DVD

DIMMER

PHONES

SLEEP

DISPLAY

INPUT SELECTOR

MASTER VOLUME

AUTO CAL

2CH

A.F.D.

MOVIE

MUSIC

?/1

VIDEO 1 IN/

PORTABLE AUDIO IN/

AUTO CAL MIC

0/10

ENTER

SYSTEM STANDBY

TV INPUT

SLEEP

AUTO

CAL

?/1

VIDEO 1

VIDEO 2

VIDEO 3

DVD

2CH

A.F.D.

RETURN/EXIT

TV CH –

PRESET –

TV CH +

TUNING –

REPLAY ADVANCE

MENU

MOVIE

MUSIC

MEMORY DVD MENU

CLEAR

TOOLS

DISPLAY

MUTING

TV VOL

MASTER VOL

FM MODE

D.TUNING

D.SKIP

AMP MENU

SAT

SA-CD/CD TUNER

?/1

>10/

2
3

Notes

• Refer to the operating

instructions supplied with the
TV and DVD player.

• Check the following if you

cannot listen to multi channel
sound.
– Be sure this receiver is

connected to the DVD player
via a digital connection.

– Be sure the digital audio

output of the DVD player is
set up properly.

Tips

• Select the sound format of the

disc to be played, if necessary.

• You can select the sound field to

suit the movie/music. Refer to
page 38 for details.
Recommended sound fields:
Movie: C.ST.EX
Music: CONCERT

Turn on the TV and DVD player.

Turn on the receiver.

Press DVD.

You can also use INPUT SELECTOR on this receiver to
select “DVD”.

Switch the input of the TV so that an image
of the DVD is displayed.

If no image is displayed on the TV screen, make sure that
the video output of the DVD player is connected to the TV.

Set up the DVD player.

Refer to “Quick Setup Guide” supplied with the receiver.

Playback the disc.

Adjust to a suitable volume.

After you have finished watching the DVD,
eject the disc and turn off the receiver, TV
and DVD player.

Summary of Contents for CTR-K790





























































Search results

Summary of Contents for CTR-K790

Reviews:

Related manuals for CTR-K790

Brands by name

Popular brands

Sony CTR-K790, Operating Instructions Manual

Search results

Summary of Contents for CTR-K790

Reviews:

Related manuals for CTR-K790

Brands by name

Popular brands