Sony CTR-K790 Page 26 Operating Instructions Manual Download

Page: 26 / 60

Selecting a component

Press the input button to select
a component.

You can also use INPUT SELECTOR on
the receiver.
The selected input appears on the display.

* “VIDEO 1/PORTABLE AUDIO” and

“VIDEO 2/BD” scroll across the display,
then “VIDEO 1” and “VIDEO 2” appear.

Turn on the component and
start playback.

Press MASTER VOL +/– to
adjust the volume.

You can also use MASTER VOLUME on
the receiver.

To activate the muting function

Press MUTING.
The muting function will be canceled when
you do the following.
• Press MUTING again.
• Increase the volume.
• Turn off the receiver.

To avoid damaging your
speakers

Before you turn off the receiver, be sure to turn
down the volume level.

Playback

0/10

ENTER

SYSTEM STANDBY

VIDEO 1

VIDEO 2

VIDEO 3

DVD

2CH

A.F.D.

RETURN/EXIT

MENU

MOVIE

MUSIC

MEMORY DVD MENU

CLEAR

TOOLS

DISPLAY

MUTING

TV VOL

MASTER VOL

FM MODE

D.TUNING

D.SKIP

AMP MENU

SAT

SA-CD/CD TUNER

>10/

MUTING

Selected
input
[Display]

Components that can be
played back

VIDEO 1
[VIDEO 1/
PORTABLE
AUDIO]*

MP3 player, etc., connected
to the VIDEO 1 IN/
PORTABLE AUDIO IN/
AUTO CAL MIC jack

VIDEO 2
[VIDEO 2/
BD]*

Blu-ray disc player, etc.,
connected to the VIDEO
2/BD jack

DVD
[DVD]

DVD player, etc., connected
to DVD jack

SAT
[SAT]

Satellite tuner, etc. connected
to the SAT jack

TV
[TV]

TV, etc. connected to the TV
jack

SA-CD/CD
[SA-CD/CD]

Super Audio CD/CD player,
etc., connected to the
SA-CD/CD jack

TUNER
[FM or AM
band]

Built-in radio tuner

Summary of Contents for CTR-K790





























































Search results

Summary of Contents for CTR-K790

Reviews:

Related manuals for CTR-K790

Brands by name

Popular brands

Sony CTR-K790, Operating Instructions Manual

Search results

Summary of Contents for CTR-K790

Reviews:

Related manuals for CTR-K790

Brands by name

Popular brands