Sony CS10 - ECM - Microphone, User Manual

Page: 46 / 78

A
d
mini
s
tra
ting
t
he
Came
ra
Sending Images to FTP Server — FTP client Menu
46
Sending Images to FTP
Server
— FTP client Menu
When you click FTP client on the Administrator menu,
the FTP client menu appears.
Use this menu to set up for capturing and sending still
images to an FTP server. By using FTP client function,
you can send the image file which has been shot and
recorded linked with the external sensor input or with
the built-in motion detection function to FTP server. The
image file can also be sent periodically.
FTP client menu is composed of three tabs
Common ,
Alarm sending and Periodical sending .
Common Tab — Setting the FTP
Client Function
FTP client function
To activate the FTP client function, select On .
When you do not wish to use the FTP client function,
select
Off .
Note
The frame rate and operability on the main viewer may
decrease while a file is being transmitted by the FTP
client function.
FTP server name
Type the FTP server name to upload still images up to 64
characters, or the IP address of the FTP server.
User name
Type the user name for the FTP server.
Password
Type the password for the FTP server.
Re-type password
To confirm the password, type the same characters as
you typed in the Password box.
Passive mode
Set whether you use the passive mode of FTP server or
not when connecting to FTP server. Select
On to
connect to FTP server using the passive mode.
OK/Cancel
See “Buttons common to every menu” on page 28.
Alarm sending Tab — Setting the
FTP client action when detecting
the alarm
Set to forward the image file to the specified FTP server
linked with the alarm detection by the external sensor
input or by the built-in motion detection function.
Tip
Only in SNC-CS11, the image file including audio data
can be forwarded.
Alarm sending
Select On to send the image file to FTP server linked
with the alarm detection.
Remote path
Type the path to the destination up to 64 characters.
Image file name
Type the file name you want to assign to the images
when sending to the FTP server. You can use up to 10