A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Camera Image and Audio — Camera Menu
35
Manual:
The shutter speed is fixed and you can set
items about exposure manually. When it is selected,
Flickerless
is displayed and can be set. Also, when
Gain up
is set to
Auto
,
Backlight compensation
and
Exposure compensation
are displayed and can
be set.
Flickerless mode
If the image is flickering under the influence of
fluorescent light, select
On
so that it being reduced by
Shutter speed
being fixed to
1/50
. When
Off
is
selected,
Shutter speed
is displayed and can be set.
Shutter speed
Select the shutter speed of the camera from the list box.
Selectable values of the shutter speed are 1/10000,
1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/100, 1/50, 1/30,
1/15, 1/8, 1/4, 1/2 and 1 second.
Note
When the
Shutter
speed
is set to either
1/15
,
1/8
,
1/4
,
1/
2
or
1
while the auto iris lens is epuipped, the auto iris
lens is fully open.
Gain up
Select the exposure adjustment mode by gain from the
list box.
Auto
,
0dB
,
6dB
,
12dB
or
18dB
can be selected.
Auto:
Executes automatic adjustment of gain.
0dB
,
6dB
,
12dB
,
18dB:
Set the gain to the fixed value.
Backlight compensation
Set
Backlight compensation
to
On
or
Off
.
Select
On
to active the
Backlight compensation
. If the
scene is in backlight, the exposure is automatically
adjusted to become brighter.
Note
When
Backlight compensation
is set to
On
, it may
generate hunting according to the scene. In this case, set
it to
Off
.
Exposure compensation
Select the
Exposure compensation
value from the list
box to adjust the brightness of auto exposure setting.
The higher value makes it brighter, and the lower value
makes it darker.
The selectable values are the followings;
+2.0, +1.6, +1.2, +0.8, +0.4, ±0.0, –0.4, –0.8, –1.2, –1.6,
–2.0
Gamma curve adjustment
Select the
Gamma curve adjustment
value from the
list box to adjust the brightness of the image displayed
in the viewer based on the recorded one.
The higher value makes it brighter, and the lower value
makes it darker.
Select from
–5
to
+5
.
Saturation
Select the saturation in 7 steps, from
–3
to +
3
.
Sel
3
gives the image with the highest saturation.
Sharpness
Select the sharpness in 7 steps, from
–3
to +
3
.
Sel
3
gives the image with the highest sharpness.
Contrast
Select the contrast in 7 steps, from
–3
to +
3
.
Sel
3
gives the image with the highest contrast.
OK/Cancel
See “Buttons common to every menu” on page 28.
User preset
You can save the present settings in the camera as the
custom, or you can load the settings saved in the camera.
Save:
Click to save the present settings of the
Picture
tab.
Load:
Click to load the saved settings. To use them,
click
OK
.
