COM-1.US.2-668-393-12(2)
Getting Started…
Setting the Connecting Method
29
29
Note
• When a connection to a wireless hotspot is successfully performed, certain types of
wireless hotspots, such as commercial service providers’ hotspots, require additional
log-in processes using the unit’s Web Browser. In order to assist determining if the
connected wireless hotspot requires such steps, the unit tries to access a specific
Website. For the details about this test access, please see below:
Access address for connection type detection: http://www.sony.com/mylo/test; the Web
address contains a simple static HTML page used for the test purposes only. There is no
personal or network information sent from the unit. The Web server provided by Sony
will not collect any information about the unit or the user.
When wireless network requires a WEP/WPA-PSK security key
If you select wireless network that requires a WEP/WPA-PSK security key, the
Wireless Network Settings screen appears. Follow the instructions on the
display to complete the connection.
Item
Options
Display Name
Enter a name to describe the wireless network in Connection
Manager.
SSID
Wireless network SSID (Service Set Identifier)
WEP/WPA
Select from among “Do Not Use,” “Use WEP KEY,” or “Use
WPA-PSK.”
KEY
Enter the security key of wireless network, if required. (If you
do not know the security key, contact the administrator of
your network.)
IP Address
When the network provides the IP address assignment
service, the unit detects the following settings automatically:
• IP address
• Subnet mask
• Gateway
• DNS server
You can also set these settings manually. If you must
manually enter these settings, but do not know what to enter,
contact the administrator of your network.
WEB Proxy
If the unit is connected to a secured private network, such as
an office network which has a firewall to the Internet, the unit
may need to use Web proxy servers. If you are not sure if this
setting is necessary, contact the administrator of your
network.
If “Use Web Proxy” is selected, you can enter the following
settings.
If “Use Web Proxy” is not selected (default setting), the
following settings are unavailable.
• Proxy address
• Proxy port
Continued
Index
Table of
Contents
