CD –
Pla
y
7
GB
You can play all the tracks or a single track on a
disc repeatedly.
Press REPEAT repeatedly during playback
until “REPEAT” or “REPEAT 1” appears.
REPEAT: For all the tracks on the disc up to five
times.
REPEAT 1: For a single track only.
To cancel Repeat Play
Press REPEAT repeatedly until both
“REPEAT” and “REPEAT 1” disappear.
Note
When you select “REPEAT 1”, that track is repeated
endlessly until “REPEAT 1” is canceled.
You can make a program of up to 25 steps.
1
Press CD (or FUNCTION on the unit
repeatedly) to switch the function to
CD.
2
Press PLAY MODE in stop mode
repeatedly until “PROGRAM” appears.
3
Press
.
or
>
repeatedly until the
desired track number appears.
4
Press ENTER.
The track is programmed.
The step number appears, followed by the
last programmed track number.
5
To program additional tracks, repeat
steps 3 and 4.
6
Press
N
.
Program Play starts.
Other operations
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press
N
.
However, the program is cleared when you eject the
disc.
• “– –.– –” appears when the total program time
exceeds 100 minutes, or when you select a CD track
numbered 21 or over.
Playing repeatedly
— Repeat Play
Creating your own
program
— Program Play
To
Do this
Cancel Program Play
Press PLAY MODE in stop
mode repeatedly until
“PROGRAM” disappears.
Clear a track from the
end
Press CLEAR in stop mode.
Add a track to the end
of the program
Perform steps 3 and 4 in stop
mode.
Selected track number
Total playing time
