![background image](http://html.mh-extra.com/html/sony/cmt-sbt20/cmt-sbt20_operating-instructions-manual_420441032.webp)
32
GB
CMT-SBT20
4-583-747-
11
(1)
Messages
The following messages may appear or flash
during operation.
COMPLETE
The station preset operation ended
normally.
DISC ERR
You have set a disc that cannot be played
back on this system, such as CD-ROM, or
tried to play an unplayable file.
FULL
You tried to program more than 64 tracks or
files.
NO DISC
There is no disc in the player, or you have set
a disc that cannot be loaded.
NO FILE
There are not playable files on the USB
device or disc.
NO STEP
There is no programmed track or file for
program play or all of the programmed
tracks or files have been erased.
NO USB
No USB device is connected, the connected
USB device has been removed, or the system
does not support the USB device.
OVER CURRENT
The system detects an over current in a
connected USB device. Remove the USB
device from the port and turn off the system
then turn on the system.
PLS STOP
You attempted to change the play mode
during playback in the CD or USB function.
READING
The system is reading the information on
the CD. Some buttons do not work during
reading.
SEARCH
The system is searching the information on
the USB device. Some buttons do not work
during searching.
TIME NG
The Play Timer start and end times are set to
the same time.
TUNING
The system is tuning to a radio station. Some
buttons do not work during tuning.