![background image](http://html.mh-extra.com/html/sony/cmt-hp7-executive-microsystem/cmt-hp7-executive-microsystem_operating-instructions-manual_420364011.webp)
CD/M
P
3
–
Pla
y
11
GB
You can play all the tracks or a single track on a
disc.
Press REPEAT/FM MODE repeatedly until
“REP” or “REP1” appears.
REP: For all the tracks on the disc(s), or all the
tracks in the album up to five times.
REP1: For a single track only.
To cancel Repeat Play
Press REPEAT/FM MODE repeatedly until
both “REP” and “REP1” disappear.
Notes
• You cannot select “REP” and “ALL DISCS SHUF”
at the same time.
• When you select “REP1”, that track is repeated
endlessly until “REP1” is canceled.
You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programed tracks
onto a cassette tape (page 17).
Use buttons on the remote for the operation.
1
Press CD (or FUNCTION on the unit
repeatedly) until “CD” appears.
2
Press PLAY MODE in stop mode
repeatedly until “PGM” appears.
3
Press D. SKIP repeatedly (or any one of
the buttons (DISC 1 – 5 on the unit)) to
select a disc.
To program all the tracks on a disc at once,
proceed to step 5 with “ALL” displayed.
4
Press
./>
repeatedly until the
desired track number appears.
When programing an MP3, press ALBUM
+/– to select an album, then press
./
>
repeatedly until the desired track
number appears.
5
Press ENTER (or PLAY MODE on the
unit).
The track is programed.
The program step number appears,
followed by the total playing time.
Playing repeatedly
— Repeat Play
Creating your own
program
— Program Play
Selected track number
Disc number
Total playing time
(including selected track)
continued