![background image](http://html.mh-extra.com/html/sony/cmt-dh50r/cmt-dh50r_operating-instructions-manual_420310030.webp)
CMT‑DH70SWR/DH50R.GB.4‑143‑190‑11(1)
0
GB
Changing the format of the video
signal output from COMPONENT VIDEO
OUT jacks
Progressive is a method for displaying
TV images that reduces flickering and
sharpens the image. To use this method,
you need to connect to a TV that can
accept progressive signals.
You can output video signals from
COMPONENT VIDEO OUT jacks in
Interlace or Progressive format.
1
Press FU/
(European
models only)/FUNCTION (except
for European models) or FUNCTION
+/
on the unit repeatedly to select
“DVD.”
2
Press DISPLAY when playback is
stopped.
The Control Menu appears on the TV
screen.
3
Press
or
repeatedly to select
(SETUP), then press ENTER.
The options for “SETUP” appear.
4
Press
or
repeatedly to select
“CUSTOM,” then press ENTER.
The Setup Menu appears.
5
Press
or
repeatedly to select
“VIDEO SETUP,” then press ENTER.
The options for “VIDEO SETUP”
appear.
6
Press
or
repeatedly to select
“PROGRESSIVE (COMPONENT OUT),”
then press ENTER.
The options for “PROGRESSIVE
(COMPONENT OUT)” appear.
7
Press
or
repeatedly to select the
desired setting, then press ENTER.
The default setting is underlined.
OFF: Outputs interlace signals.
Select this setting when:
your TV does not accept
progressive signals.
your TV is connected to jacks
other than the COMPONENT
VIDEO OUT jacks.
ON: Outputs progressive signals.
Select this setting when:
your TV accepts progressive
signals.
your TV is connected to the
COMPONENT VIDEO OUT
jacks.
When you select “ON,” the
confirmation display appears. Follow
the steps below.
Summary of Contents for CMT-DH50R
Page 1: ......
Page 5: ... GB ...
Page 14: ...14GB Remote European models only Except for European models ...
Page 139: ...Additional Information 139GB ...