27
GB
Menu Lists
U
s
ing the
Men
u
s
SET SETTING
MENU SETTING
INSTALL SETTING
INFORMATION
Item
Description
Smart APA
With this item set to On, the APA function
works automatically for a signal input from
a computer so that the picture can be seen
clearly. You can also activate the APA
function by pressing the APA button on the
remote control.
Tip
The APA (Auto Pixel Alignment) automatically
adjusts the input signal from a computer so that
the picture can be seen clearly.
Auto Input
Search
Set to On when an optional Interface Unit
such as the IFU-HS1 is connected to the PJ
MULTI connector on the projector.
Input-A Signal
Sel.
Selects the signal input from the equipment
by selecting “Input-A” with the INPUT
button.
Computer: Inputs the signal from a
computer.
Component: Inputs the component or
progressive component signal from a
DVD player, digital tuner, etc.
Video GBR: Inputs the signal from a
digital tuner.
Color System
Select the color system of the input signal.
Auto: Selects the color system of the input
signal automatically from among NTSC,
PAL, SECAM, NTSC
4.43
, PAL-M or
PAL-N.
“NTSC3. 58”–“PAL-N”: Sets the color
system to the selected system manually.
Power Saving
When set to On, the POWER SAVING
indicator lights. The projector goes into
power saving mode if no signal is input for
10 minutes, and the lamp goes out and the
cooling fan keeps running. In power saving
mode, no button functions for the first 60
seconds. It is cancelled when a signal is
input or any button is pressed. If you do not
set the projector to power saving mode,
select Off.
Illumination
Turns on the illumination on the top panel
of the projector when set to On. It turns off
when set to Off.
Item
Description
Status
Set to Off to turn off the on-screen
displays except for the menus, message
when turning off the power, and warning
messages.
Language
Selects the language used in the menu and
on-screen displays. Available languages
are: English, French, German, Italian,
Spanish, Portuguese, Japanese, Chinese
and Korean.
Menu Position
Selects the display position from Top
Left, Bottom Left, Center, Top Right
and Bottom Right.
Menu Color
Selects the tone of the menu display from
White or Black.
Item
Description
V Keystone
Corrects the vertical trapezoidal distortion
of the picture. (
)
Auto: Normally set to this postion.
Manual: Sets a lower value (– direction)
when the bottom of the trapezoid is
longer than the top. Sets a higher value
(+ direction) when the top of the
trapezoid is longer than the bottom. If
you project the picture using “Side
Shot” only, set to “Manual,” and adjust
the level to “0.”
Note
The “V Keystone” adjustment may not correct
the trapezoidal distortion perfectly, depending on
the room temperature or the screen angle. In this
case, adjust the distortion manually.
Side Shot
Corrects the horizontal trapezoidal
distortion of the picture. (
)
Set the level to “0” when you adjust the
picture using “V Keystone” only.
Image Flip
Flips the picture on the screen horizontally
and/or vertically.
Off: The picture does not flip.
HV: Flips the picture horizontally and
vertically.
H: Flips the picture horizontally.
V: Flips the picture vertically.
Background
Selects the background color of the screen
when no signal is input. You can select
“Black” or “Blue.”
Test Pattern
When set to On, a test pattern is displayed
on the screen when adjusting using “Side
Shot” or “V Keystone.” If you do not want
to display a test pattern, set to Off.
High Altitude
Mode
Off: Use this setting when using the
projector at normal altitudes.
On: Use this setting when using the
projector at an altitude of 1,500 m or
higher.
Item
Description
fH
Displays the horizontal frequency of the
input signal.
fV
Displays the vertical frequency of the input
signal.
Lamp Timer
Indicates how long the lamp has been
turned on.
