2-8
VPL-HS2
4) MID/HIGH/LOW Mode of VIDEO
1.
Input the VIDEO signal of NTSC or PAL.
2.
Set the BIAS R, G and B and GAIN R, G and B of
MID, HIGH and LOW mode of W/B that are equal to
the values of corresponding items in INPUT-A.
(Altogether 18 items)
2-5. Tilt Adjustment
1.
Set the Factory mode to “Device Adjust/OTHER”.
2.
Adjust the stand and put the main unit into the
horizontal state. (The horizontal state of this unit is
forward tilted by
_
4
d
.)
3.
Then, enter the X TILT value to C0.
4.
Set the unit upward in vertically.
5.
Then, enter the X TILT value to C1.
6.
Set the unit downward in vertically.
7.
Then, enter the X TILT value to C2.
8.
Save the each values of C0, C1 and C2 described in
step3, 5 and 7.
2-4. White Balance Adjustment on
Servicing
2-4-1. White Balance Adjustment
Input the 10 STEP signal to INPUT-A, and observe the
chromaticity of each luminance.
When varying the chromaticity of each luminance, perform
the following adjustments.
1) MID Mode of INPUT-A
1.
Input the 80 IRE FLAT FIELD signal to INPUT-A.
2.
Adjust the chromaticity (x at 0.290, y at 0.320) values
by the GAIN R and B of W/B MID mode.
3.
Set the INPUT signal to the 30 IRE FLAT FIELD
signal.
4.
Adjust the chromaticity (x, y) to (0.290, 0.320) by the
BIAS R and B.
5.
Repeat above steps 1 to 4 until the chromaticity
become the following values.
(0.290
±
0.002, 0.320
±
0.004)
2) HIGH Mode of INPUT-A
1.
Input the 80 IRE FLAT FIELD signal to INPUT-A.
2.
Set the GAIN G to the integar of MID mode value
x
0.96 with the HIGH mode of the W/B.
3.
Input the 30 IRE signal to INPUT-A.
4.
Adjust the chromaticity (x at 0.284, y at 0.298) values
by the BIAS R and B of W/B HIGH mode.
5.
Input the 80 IRE signal to INPUT-A.
6.
Adjust the chromaticity (x at 0.284, y at 0.298) values
by the GAIN R and B.
7.
Repeat above steps 3. to 6. until the chromaticity
become the following values.
x: 0.284
±
0.002, y: 0.298
±
0.004
3) LOW Mode of INPUT-A
1.
Input the 80 IRE FLAT FIELD signal to INPUT-A.
2.
Input the 30 IRE signal to INPUT-A.
3.
Adjust the chromaticity (x at 0.313, y at 0.329) values
by the BIAS R and B of W/B LOW mode.
4.
Input the 80 IRE signal to INPUT-A.
5.
Adjust the chromaticity (x at 0.313, y at 0.329) values
by the GAIN G and B.
6.
Repeat above steps 2 to 5 until the chromaticity
become the following values.
x: 0.313
±
0.002, y: 0.329
±
0.004
_
4
d
B
Lever
Stand
Align the A with the center position
of the B.
A
Summary of Contents for Cineza VPL-HS2
