18
Repeat and shuffle play
1
During playback, press
(3)
(REP) or
(4)
(SHUF) repeatedly until the
desired setting appears.
After 3 seconds, the setting is complete.
To return to normal play mode, select “
OFF”
or “SHUF OFF.”
Operating an iPod directly
— Passenger control
You can operate an iPod connected to the dock
connector directly.
1
During playback, press and hold
(MODE)
.
“MODE IPOD” appears and you will be able
to operate the iPod directly.
To change the display item
Press
(DSPL)
.
The display items change as follows:
Track name
t
Artist name
t
Album name
t
MODE IPOD
t
Clock
To exit the passenger control
Press and hold
(MODE)
.
Then “MODE AUDIO” will appear and the play
mode will change to “RESUMING.”
Notes
•
The volume can be adjusted only by the unit.
•
If this mode is canceled, the repeat setting will be
turned off.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
1
Press the select button repeatedly
until the desired item appears.
2
Rotate the control dial to adjust the
selected item.
3
Press
(BACK).
The setting is complete and the display
returns to normal reception/play mode.
The following items can be set (follow the page
reference for details):
Select
To play
TRACK
track repeatedly.
ALBUM
album repeatedly.
PODCAST
podcast repeatedly.
ARTIST
artist repeatedly.
PLAYLIST
playlist repeatedly.
GENRE
genre repeatedly.
SHUF ALBUM
album in random order.
SHUF PODCAST
podcast in random order.
SHUF ARTIST
artist in random order.
SHUF PLAYLIST
playlist in random order.
SHUF GENRE
genre in random order.
SHUF DEVICE
device in random order.
EQ3
Selects an equalizer curve from 7 music types
(XPLOD, VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
DSO
(Dynamic Soundstage Organizer)
Creates a more ambient sound field.
To select the DSO mode: “1,” “2,” “3” or “OFF.”
The larger the number, the more enhanced the
effect.
LOW
*
1
, MID
*
1
, HI
*
1
BAL
(Balance)
Adjusts the sound balance between the left and
right speakers.
FAD
(Fader)
Adjusts the relative level between the front and
rear speakers.
SUB
*
2
(Subwoofer volume)
Adjusts the subwoofer volume.
AUX
*
3
(AUX level)
Adjusts the volume level for each connected
auxiliary equipment: “+18 dB” – “0 dB” – “–8
dB.”
This setting negates the need to adjust the
volume level between sources.
*1
When EQ3 is activated.
*2
“ATT” is displayed at the lowest setting, and can be
adjusted up to 21 steps.
*3
When AUX source is activated (page 20).
