9
Receiving a station through a list
— LIST
You can list up the frequency or the name. For
details on labelling a station, see page 10.
(With the card remote commander)
1
Select the band, then press
(LIST)
.
The frequency or station appears.
2
Press
M
or
m
repeatedly until the
desired station appears.
3
Press
(ENTER)
to receive the station.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, fader
and subwoofer volume.
1
Select a source, then press
(SOUND)
repeatedly to select the desired item.
The item changes as follows:
BAS
(bass)
t
TRE
(treble)
t
BAL
(left-right)
t
FAD
(front-rear)
t
SUBW
(subwoofer volume)*
*
“ATT” is displayed at the lowest setting, and can
be adjusted up to 20 steps.
2
Press the /– button
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2, to adjust the selected item, press
<
or
,
.
Adjusting the equalizer curve
— EQ7 Tune
You can adjust and store the equalizer settings
for different tone ranges.
(With the card remote commander)
1
Select a source, then press
(MENU)
.
2
Press
M
or
m
repeatedly until “EQ7
Tune” appears, then press
(ENTER)
.
3
Press
<
or
,
repeatedly to select
the desired equalizer type, then press
(ENTER)
.
4
Press
<
or
,
repeatedly to select
the desired frequency.
The frequency changes as follows:
62Hz
y
157Hz
y
396Hz
y
1kHz
y
2.5kHz
y
6.3kHz
y
16kHz
continue to next page
t
