19
Other Functions
You can also control the unit (and optional CD/
MD units) with a rotary commander
(optional)
.
Using the rotary commander
First, attach the appropriate label depending on
how you want to mount the rotary commander.
The rotary commander works by pressing
buttons and/or rotating controls.
By pressing buttons
By rotating the control
Rotate and release to:
– Skip tracks.
– Tune in stations automatically.
Rotate, hold, and release to:
– Fast-forward/reverse a track.
– Find a station manually.
By pushing in and rotating the control
Push in and rotate the control to:
– Receive preset stations.
– Change discs during CD (MD) playback*
1
.
– Change albums*
4
.
*1
Only if the corresponding optional equipment is
connected.
*2
Available only when an optional Sony portable
device is connected to BUS AUDIO IN of the unit.
You cannot connect any optional CD/MD units at
the same time.
*3
If your car has no ACC (accessory) position on the
ignition key switch, after turning off the ignition, be
sure to press and hold
(OFF)
until the display
disappears.
*4
When an MP3 file is played.
When an MP3 file is played, you can select an
album using the rotary commander.
(With this unit)
Press
To
(SOURCE)
Change source
(radio/CD/MD*
1
/AUX*
2
)/
Power on
(MODE)
Change operation
(radio band/CD unit/MD*
1
unit)
(ATT)
Attenuate sound
(OFF)
*
3
Stop playback or radio
reception/Power off
(SOUND)
Adjust the sound menu
(DSPL)
Change the display item
(For 2 seconds to scroll the
display item)
SOUND
DSPL
MODE
SOUND
DSPL
MODE
OFF
Rotate the VOL control
to adjust the volume.
(SOURCE)
(SOUND)
(ATT)
(DSPL)
(OFF)
(MODE)
To
Do this
Skip albums
– Album selection
Push in and rotate [once for
each album] the control.
To continuously skip
albums, push in and rotate
(and hold) the control.
continue to next page
t
SEEK/AMS
control
PRESET/DISC
control
