Sony CDX-M670 (XT-XM1), Operation Instructions Manual

Page: 16 / 254

16
Receiving the stored stations
1
Press (SOURCE) repeatedly to select
the radio.
2
Press
(MODE)
repeatedly to select the
band.
3
Press the number button ( (1) to (6) )
on which the desired station is stored.
Tip
Press
M or m to receive the stations in the order they
are stored in the memory (Preset Search function).
If preset tuning does not work
Press either side of (SEEK) to search
for the station (automatic tuning).
Scanning stops when the unit receives a
station. Repeat until the desired station is
received.
Tips
• If automatic tuning stops too frequently, turn on the
Local Seek to limit seek to stations with stronger
signals (see “Changing the sound and display
settings” on page 34).
• If you know the frequency of the station you want to
listen to, press and hold either side of
(SEEK)
to
locate the approximate frequency, then press
(SEEK)
repeatedly to fine adjust to the desired
frequency (manual tuning).
If FM stereo reception is poor
Select monaural reception mode
(see “Changing the sound and display
settings” on page 34).
The sound improves, but becomes monaural
(“ST” disappears).
Storing only the desired
stations
You can manually preset the desired stations on
any chosen number button.
1
Press
(SOURCE)
repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
band.
3
Press either side of
(SEEK)
to tune in
the station that you want to store.
4
Press the desired number button ( (1)
to
(6)
) for 2 seconds until “MEM”
appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.