12
Using optional equipment
Auxiliary audio equipment
By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your boat’s speakers. The volume
level is adjustable for any difference between the
unit and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1
Turn off the portable audio device.
2
Turn down the volume on the unit.
3
Connect to the unit.
*
Be sure to use a straight type plug.
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1
Turn down the volume on the unit.
2
Press
(SOURCE)
repeatedly until “AUX”
appears.
“FRONT IN” appears.
3
Start playback of the portable audio device at a
moderate volume.
4
Set your usual listening volume on the unit.
5
Press the select button repeatedly until “AUX”
appears, and rotate the volume control dial to
adjust the input level (–8 dB to +18 dB).
Card remote commander RM-X114
The corresponding buttons on the card remote
commander control the same functions as those
on this unit.
A.SCRL
(Auto Scroll)
To scroll long displayed item automatically
when the album/track is changed.
– “A.SCRL-ON” (
z
): to scroll.
– “A.SCRL-OFF”: to not scroll.
LOCAL
(Local Seek Mode)
– “LOCAL-ON” : to only tune into stations with
stronger signals.
– “LOCAL-OFF” (
z
): to tune normal reception.
MONO
*
3
(Monaural Mode)
To improve poor FM reception, select monaural
reception mode.
– “MONO-ON” : to hear stereo broadcast in
monaural.
– “MONO-OFF” (
z
): to hear stereo broadcast in
stereo.
REG
*
1
*
3
(Regional)
To set “REG-ON” (
z
) or “REG-OFF” (page 10).
LPF
*
4
(Low Pass Filter)
To select the subwoofer cut-off frequency: “LPF
OFF” (
z
), “LPF125Hz” or “LPF 78Hz.”
LOUD
(Loudness)
To allow you to listen clearly at low volume
levels.
– “LOUD-ON” : to reinforce bass and treble.
– “LOUD-OFF” (
z
): to not reinforce bass and
treble.
BTM
*1
CDX-MR10 only
*2
When the unit is turned off.
*3
When FM is received.
*4
When the audio output is set to “SUB.”
AUX
AUX
Connecting cord
*
(not supplied)
DISC –
ATT
OFF
DSPL
MODE
SOURCE
DISC +
VOL
+
–
SEEK+
SEEK–
PRESET –
SOUND
ENTE
R
MENU
LIST
MODE
LIST
ENTER
*
ATT
DSPL
MENU
*
SOURCE
<
/
,
(SEEK –/+ )
SOUND
OFF
VOL (+/ –)
m
/
M
(DISC
*
/
PRESET
+/ –)
