20
Operating an iPod directly
— Passenger control
You can operate an iPod connected to the dock
connector directly.
1
During playback, press and hold
(MODE)
.
“Mode iPod” appears and you will be able to
operate the iPod directly.
To exit the passenger control
Press and hold
(MODE)
.
Then “Mode Audio” will appear and the play
mode will change to “Resuming.”
Notes
•
The volume can be adjusted only by the unit.
•
If this mode is canceled, the repeat setting will be
turned off.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
1
Press the multi way encoder.
2
Rotate the multi way encoder until the
desired menu item appears, then
press it.
3
Use the multi way encoder to select
the setting, then press it.
4
Press
(BACK).
The setting is complete and the display
returns to normal play/reception mode.
The following items can be set:
The operation of the multi way encoder will
differ depending on the items.
: Push the multi way encoder up/down
: Push the multi way encoder left/right
: Rotate the multi way encoder
EQ3 Parametric Preset
(
or
)
Selects an equalizer curve from 7 music types.
EQ3 Parametric Tune
*
1
Custom equalizer settings. See “Customizing
the equalizer curve — EQ3 Parametric Tune”
Subwoofer Tune & LPF
Phase
(
,
or press
(MODE)
)
Selects the phase: “Normal,” “Reverse.”
FREQ
(
)
Selects the subwoofer cut-off frequency:
“80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz,”
“off.”
Level
(
)
Adjusts the subwoofer volume: “+10 dB” –
“0 dB” – “–10 dB.”
(“–
∞
” is displayed at the lowest setting.)
HPF & Speaker Select
Speaker
(
)
Selects the Speaker: “All,” “Front”, or “Rear.”
FREQ
(
)
Selects the cut-off frequency: “off,” “80Hz,”
“100Hz,” “120Hz,” “140Hz,” “160Hz.”
DM+ Advanced
*
2
(
or
)
Improves digitally compressed sound, such as
MP3.
To activate the DM+ Advanced function, set
“on.” To cancel, set “off.”
