18
Repeat and shuffle play
1
During playback, press
(1)
(REP) on
the card remote commander or
(SHUF/ZAP)
on the unit repeatedly until
the desired setting appears.
To return to normal play mode, select “Repeat
off” or “Shuffle off.”
After about 3 seconds, the setting is complete.
iPod
For details on the compatibility of your iPod, see
“About iPod” on page 25 or visit the support site.
In these Operating Instructions, “iPod” is used as
a general reference for the iPod functions on the
iPod and iPhone, unless otherwise specified by
the text or illustrations.
Playing back iPod
Before connecting the iPod, turn down the
volume of the unit.
1
Remove the USB cap from the USB
connector and connect the iPod to the
USB connector via the dock connector
to USB cable.
The iPod will turn on automatically, and the
display will appear on the iPod screen as
below.*
Tip
We recommend the RC-100IP USB cable (not
supplied) to connect the dock connector.
The tracks on the iPod start playing
automatically from the point last played.
If an iPod is already connected, to start
playback press
(SOURCE)
repeatedly until
“USB” appears. (“iPod” appears in the
display when iPod is recognized.)
*
If the iPod was played back in the passenger control
last time, this will not appear.
Select
To play
Repeat Track
track repeatedly.
Repeat Album
album repeatedly.
Shuffle Album
album in random order.
Shuffle Device
device in random order.
Support site
http://support.sony-europe.com
