Sony CDX-GT700D, Service Manual

Page: 52 / 62

52
CDX-GT700D/GT705DX
SECTION 6
ELECTRICAL PARTS LIST
A-1159-120-A DISPLAY BOARD, COMPLETE
************************
2-189-846-01 FILTER (FL)
< CAPACITOR >
C901 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C902 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C903 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C905 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C915 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C919 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C920 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C921 1-100-758-11 CERAMIC CHIP 0.047uF 10% 250V
C925 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C926 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C927 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C928 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C929 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
< CONNECTOR >
CN902 1-818-141-11 PLUG, CONNECTOR 20P
< DIODE >
D901 6-500-886-01 DIODE RSA6.1ENTR
D902 6-500-886-01 DIODE RSA6.1ENTR
D904 6-501-193-01 DIODE 1SS355WTE-17
D907 6-501-170-01 DIODE UDZW-TE17-6.8B
D908 6-501-170-01 DIODE UDZW-TE17-6.8B
D912 1-216-295-11 SHORT CHIP 0
D920 6-501-170-01 DIODE UDZW-TE17-6.8B
< RESISTOR >
FB901 1-216-809-11 METAL CHIP 100 5% 1/10W
FB902 1-216-809-11 METAL CHIP 100 5% 1/10W
FB903 1-216-809-11 METAL CHIP 100 5% 1/10W
FB904 1-216-864-11 SHORT CHIP 0
FB905 1-216-809-11 METAL CHIP 100 5% 1/10W
FB908 1-216-809-11 METAL CHIP 100 5% 1/10W
FB911 1-216-864-11 SHORT CHIP 0
FB912 1-216-809-11 METAL CHIP 100 5% 1/10W
FB913 1-216-809-11 METAL CHIP 100 5% 1/10W
FB914 1-216-809-11 METAL CHIP 100 5% 1/10W
FB915 1-216-809-11 METAL CHIP 100 5% 1/10W
FB916 1-216-809-11 METAL CHIP 100 5% 1/10W
FB917 1-216-864-11 SHORT CHIP 0
FB918 1-216-864-11 SHORT CHIP 0
FB919 1-216-864-11 SHORT CHIP 0
FB920 1-216-809-11 METAL CHIP 100 5% 1/10W
FB921 1-216-809-11 METAL CHIP 100 5% 1/10W
< VACUUM FLUORESCENT DISPLAY >
FL900 1-519-842-11 VACUUM FLUORESCENT DISPLAY
< IC >
IC901 6-806-247-01 IC M30876MJB-054GP
IC903 6-600-163-01 IC RS-770 (IR)
IC904 8-759-659-13 IC PST3428UL
< JUMPER RESISTOR >
JC902 1-216-864-11 SHORT CHIP 0
< DIODE >
LED911 6-500-476-01 LED SML310BA1TT86 (MENU)
LED912 6-500-476-01 LED SML310BA1TT86 (
M > /SEEK +)
LED913 6-500-476-01 LED SML310BA1TT86 (VOL ILLUMINATION)
LED914 6-500-476-01 LED SML310BA1TT86 (VOL ILLUMINATION)
LED915 6-500-476-01 LED SML310BA1TT86 (VOL ILLUMINATION)
LED916 6-500-476-01 LED SML310BA1TT86 (VOL ILLUMINATION)
LED917 6-500-476-01 LED SML310BA1TT86 (ENTER)
LED918 6-500-476-01 LED SML310BA1TT86 (
. m
/SEEK –)
LED919 6-500-476-01 LED SML310BA1TT86 (DSPL/PTY) (GT700D)
LED919 6-500-476-01 LED SML310BA1TT86 (DSPL) (GT705DX)
LED920 6-500-476-01 LED SML310BA1TT86 (BBE/BBE MP)
LED921 6-500-476-01 LED SML310BA1TT86 (OPEN)
LED923 6-500-476-01 LED SML310BA1TT86 (SOURCE)
LED924 6-500-476-01 LED SML310BA1TT86 (IMAGE)
LED925 6-500-476-01 LED SML310BA1TT86 (HDEQ)
< SWITCH >
LSW903 1-786-802-11 SWITCH, TACTILE (WITH LED) (AF/TA)
(GT700D)
LSW903 1-786-802-11 SWITCH, TACTILE (WITH LED) (SCRL)
(GT705DX)
LSW904 1-786-802-11 SWITCH, TACTILE (WITH LED) (6/PAUSE)
LSW905 1-786-802-11 SWITCH, TACTILE (WITH LED) (5)
LSW906 1-786-802-11 SWITCH, TACTILE (WITH LED) (4)
LSW907 1-786-802-11 SWITCH, TACTILE (WITH LED) (3)
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
NOTE:
• Due to standardization, replacements in
the parts list may be different from the
parts specified in the diagrams or the
components used on the set.
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
• RESISTORS
All resistors are in ohms.
METAL:Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
F:nonflammable
• Abbreviation
CND : Canadian model
• Items marked “*” are not stocked since
they are seldom required for routine service.
Some delay should be anticipated
when ordering these items.
• SEMICONDUCTORS
In each case, u :
µ , for example:
uA.. : µ A.. uPA.. : µ PA..
uPB.. : µ PB.. uPC.. : µ PC.. uPD.. : µ PD..
• CAPACITORS
uF :
µ F
• COILS
uH :
µ H
DISPLAY
The components identified by
mark
0
or dotted line with mark.
0
are critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque
0
sont critiques pour
la sécurité.
Ne les remplacer que par une piéce
portant le numéro spécifié.
When indicating parts by reference
number, please include the board.