18
Operating an iPod directly
— Passenger control
You can operate an iPod connected to the dock
connector directly.
1
During playback, press and hold
(MODE)
.
“MODE IPOD” appears and you will be able
to operate the iPod directly.
To change the display item
Press
(DSPL)
.
The display items change as follows:
Track name
t
Artist name
t
Album name
t
MODE IPOD
t
Clock
To exit the passenger control
Press and hold
(MODE)
.
Then “MODE AUDIO” will appear and the play
mode will change to resuming mode.
Notes
•
The volume can be adjusted only by the unit.
•
If this mode is canceled, the repeat setting will be
turned off.
Searching for a track
Searching a track by name
— Quick-BrowZer™
You can search for a track in a CD or USB device
easily by category.
1
Press
(BROWSE).
The unit enters the Quick-BrowZer mode,
and the list of search categories appears.
2
Rotate the control dial to select the
desired search category, then press it
to confirm.
3
Repeat step 2 until the desired track is
selected.
Playback starts.
To return to the previous display
Press
(BACK).
To exit the Quick-BrowZer mode
Press
(BROWSE).
Note
When entering the Quick-BrowZer mode, the repeat/
shuffle setting is canceled.
Searching by skip items
— Jump mode
When many items are in a category, you can
search the desired item quickly.
1
Press
(SEEK)
+ in Quick-BrowZer
mode.
The following display appears.
A
Current item number
B
Total item number in the current layer
Then the item name will appear.
2
Rotate the control dial to select the
desired item or one near the desired
item.
It skips in steps of 10% of the total item
number.
3
Press the select button.
The display returns to the Quick-BrowZer
mode and the selected item appears.
4
Rotate the control dial to select the
desired item and press it.
Playback starts if the selected item is a track.