Sony CDX-GT40UW, Operating Instructions Manual

Page: 12 / 48

12
Searching a track by listening
to track passages — ZAPPIN
™
While playing back short track passages in a
CD or USB device in sequence, you can
search for a track you want to listen to.
ZAPPIN mode is suitable for searching for a
track in shuffle or shuffle repeat mode.
1
Press

(ZAP) during playback.
Playback starts from a passage of the
next track. You can select the playback
time (page 15).
2
Press the select button or

(ZAP)
when a track you want to listen is
played back.
The track that you select returns to
normal play mode from the beginning.
Pressing (BACK) also confirms a
track to playback.
Tips
• Press

+/– in ZAPPIN mode to skip a
track.
• Press

/

(ALBUM

/

) in ZAPPIN
mode to skip album.
Sound Settings and
Setup Menu
Changing the sound
settings
Adjusting the sound
characteristics
1
During reception/playback, press the
select button.
2
Rotate the control dial until the desired
menu item appears, then press it.
3
Rotate the control dial to select the
setting, then press it.
4
Press (BACK).
The following items can be set:
The part of each track to play
back in ZAPPIN mode.
Track

(ZAP) pressed.
EQ7 PRESET (page 13)
EQ7 SETTING (page 13)
POSITION
SET POSITION (Listening Position
setting) (page 14)
ADJ POSITION *
1
(Listening Position
adjustment) (page 14)
SET SW POS *
1
*
2
(Subwoofer Position
setting) (page 14)
BALANCE
Adjusts the sound balance: “RIGHT-15”
– “CENTER” – “LEFT-15.”
FADER
Adjusts the relative level: “FRONT-15” –
“CENTER” – “REAR-15.”
DM+ (page 14)
RB ENH (Rear Bass Enhancer) (page 15)