12
Adjusting setup items — SET
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the control dial to select the
setting (example “ON” or “OFF”).
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
CLOCK-ADJ
(Clock Adjust) (page 4)
CT
(Clock Time)
Sets the clock automatically: “ON,” “OFF”
(page 8, 9).
BEEP
Activates the beep sound: “ON,” “OFF.”
AUX-A
*
1
(AUX Audio)
Activates the AUX source display: “ON,”
“OFF” (page 13).
A.OFF
(Auto Off)
Shuts off automatically after a desired time
when the unit is turned off: “NO,” “30S
(seconds),” “30M (minutes),” “60M (minutes).”
SUB/REAR
*
1
Switches the audio output: “SUB-OUT”
(subwoofer), “REAR-OUT” (power amplifier).
DEMO
(Demonstration)
Activates the demonstration: “ON,” “OFF.”
DIM
(Dimmer)
Changes the display brightness: “ON,” “OFF.”
M.DSPL
(Motion Display)
Selects the Motion Display mode.
– “ON”: to show moving patterns.
– “OFF”: to deactivate the Motion Display.
A.SCRL
(Auto Scroll)
Scrolls long items automatically: “ON,” “OFF.”
LOCAL
(Local Seek Mode)
– “ON”: to only tune into stations with stronger
signals.
– “OFF”: to tune normal reception.
MONO
*
2
(Monaural Mode)
Selects monaural reception mode to improve
poor FM reception: “ON,” “OFF.”
REG
*
2
(Regional) (page 9)
LPF
*
3
(Low Pass Filter)
Selects the subwoofer cut-off frequency: “OFF,”
“80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz.”
LPF NORM/REV
*
3
(Low Pass Filter Normal/
Reverse)
Selects the phase when the LPF is on: “NORM,”
“REV.”
HPF
(High Pass Filter)
Selects the front/rear speaker cut-off frequency:
“OFF,” “80Hz,” “100Hz,” “120Hz,” “140Hz,”
“160Hz.”
LOUD
(Loudness)
Reinforces bass and treble for clear sound at low
volume levels: “ON,” “OFF.”
BTM
S.SET
S.LED
S.TIME
S.SENS
*1
When the unit is turned off.
*2
When FM is received.
*3
When the audio output is set to “SUB-OUT.”
