12
Display
Receive Mode
Sound
Edit
*1
When the unit is turned off.
*2
When FM is received.
Using optional equipment
CD/MD changer
Selecting the changer
1
Press
(SOURCE)
repeatedly until “CD” or
“MD” appears.
2
Press
(MODE)
repeatedly until the desired
changer appears.
Playback starts.
Beep
To set “on” (
z
) or “off.”
RM
(Rotary Commander)
To change the operative direction of the rotary
commander controls.
– “Normal” (
z
): to use the rotary commander in
the factory-set position.
– “Reverse”: when you mount the rotary
commander on the right side of the steering
column.
AUX-A
(AUX Audio)*
1
To turn the AUX source display “on” (
z
) or
“off” (page 14).
Clock
(Clock Information)
To display the clock and the display items/image
at the same time.
– “on”: to display at the same time.
– “off” (
z
): to not display at the same time.
A.Image
(Auto Image)
Auto Image mode automatically steps (every 10
seconds) through the display images of all
display images.
– “off” (
z
): to not change the image
automatically.
– “ALL”: to step repeatedly through the display
images in all display modes.
– “SA”: to step repeatedly through the display
images of Spectrum analyzer.
– “Movie”: to step repeatedly through the
display images of Movie mode.
INFO
(Display Information)
To display the items (depending on the source,
etc.) at the bottom of the display while a image
is displayed.
– “on” (
z
): to display the items.
– “off”: to not display any items.
Dimmer
To change the brightness of the display.
– “Auto” (
z
): to dim the display automatically
when you turn lights on.
– “on”: to dim the display.
– “off”: to deactivate the dimmer.
Demo
*
1
(Demonstration)
To set “on” (
z
) or “off” (page 4).
A.Scroll
(Auto Scroll)
To scroll long displayed item automatically
when the disc/group/track is changed.
– “on”: to scroll.
– “off” (
z
): to not scroll.
Local
(Local seek mode)
– “on”: to only tune into stations with stronger
signals.
– “off” (
z
): to tune normal reception.
Mono
(Monaural mode)
To improve poor FM reception, select monaural
reception mode.
– “on”: to hear stereo broadcasts in monaural.
– “off” (
z
): to hear stereo broadcast in stereo.
Regional
*
2
To set “on” (
z
) or “off” (page 10).
EQ7 Tune
HPF
(High Pass Filter)
To select the front/rear speaker cut-off
frequency: “off” (
z
), “78Hz” or “125Hz.”
LPF
(Low Pass Filter)
To select the subwoofer cut-off frequency: “off”
(
z
), “125Hz” or “78Hz.”
Loudness
To enhance bass and treble at lower volume.
– “on”: to reinforce bass and treble.
– “off” (
z
): to not reinforce bass and treble.
AUX Level
To adjust the volume level for each connected
auxiliary equipment (page 14). This setting
negates the need to adjust the volume level
between sources.
Name Edit
Name Delete
BTM
Disc number
Unit number
