11
The following items can be set (follow the page
reference for details):
“
z
” indicates the default settings.
Setup
Display
Receive Mode
Sound
Edit
*1
When the unit is turned off.
*2
In such cases, some FM stereo broadcasts may
become monaural while in the stereo reception
mode.
Using optional equipment
CD/MD changer
Selecting the changer
1
Press
(SOURCE)
repeatedly until “CD” or
“MD” appears.
Clock Adjust
(Clock Adjust) (page 4)
Beep
To set “on” (
z
) or “off.”
RM
(Rotary Commander)
To change the operative direction of the rotary
commander controls.
– “Normal” (
z
): to use the rotary commander in
the factory-set position.
– “Reverse”: when you mount the rotary
commander on the right side of the steering
column.
AUX-A
*
1
(AUX Audio)
To turn the AUX source display “on” (
z
) or
“off” (page 13).
Clock
(Clock Information)
To display the clock and the display items/image
at the same time.
– “on”: to display at the same time.
– “off” (
z
): to not display at the same time.
A.Image
(Auto Image)
Auto Image mode automatically steps (every 10
seconds) through the display images.
– “off” (
z
): to not change the image
automatically.
– “ALL”: to step repeatedly through the display
images in all display modes.
– “SA”: to step repeatedly through the display
images of Spectrum analyzer mode.
– “Movie”: to step repeatedly through the
display images of Movie mode.
INFO
(Display Information)
To display the items (depending on the source,
etc.) at the bottom of the display while a image
is displayed.
– “on” (
z
): to display the items.
– “off”: to not display any items.
Dimmer
To change the brightness of the display.
– “Auto” (
z
): to dim the display automatically
when you turn lights on.
– “on”: to dim the display.
– “off”: to deactivate the dimmer.
Demo
*
1
(Demonstration)
To set “on” (
z
) or “off.”
A.Scroll
(Auto Scroll)
To scroll long displayed item automatically
when the disc/group/track is changed.
– “on”: to scroll.
– “off” (
z
): to not scroll.
Local
(Local seek mode)
– “on”: to only tune into stations with stronger
signals.
– “off” (
z
): to tune normal reception.
Mono
(Monaural mode)
To improve poor FM reception, select monaural
reception mode.
– “on”: to hear stereo broadcasts in monaural.
– “off” (
z
): to hear stereo broadcast in stereo.
IF
– “Auto” (
z
): to narrow automatically the
reception frequency to eliminate noise.
– “Wide”*
2
: to always hear FM stereo
broadcasts in stereo and with full the
frequency signal reception.
EQ7 Tune
HPF
(High Pass Filter)
To select the front/rear speaker cut-off
frequency: “off,” (
z
) “78Hz” or “125Hz.”
LPF
(Low Pass Filter)
To select the subwoofer cut-off frequency: “off,”
(
z
) “125Hz” or “78Hz.”
Loudness
To enhance bass and treble at lower volume.
– “on”: to reinforce bass and treble.
– “off” (
z
): to not reinforce bass and treble.
AUX Level
To adjust the input level for each connected
auxiliary equipment (±6 dB). This setting
negates the need to adjust the volume level
between sources.
Name Edit
Name Delete
BTM
continue to next page
t
Summary of Contents for CDX-F605X - Fm/am Compact Disc Player
Page 39: ......
