16
Receiving the stored stations
1
Press
(SOURCE)
repeatedly to select
the radio.
2
Press
(MODE)
repeatedly to select the
band.
3
Press the number button (
(1)
to
(6)
)
on which the desired station is stored.
Tip
Press
(DISC/PRESET)
(+) or
(DISC/PRESET)
(–) to
receive the stations in the order they are stored in the
memory (Preset Search function).
If preset tuning does not work
Press
(SEEK)
(+) or
(SEEK)
(–) to
search for the station (automatic
tuning).
Scanning stops when the unit receives a
station. Repeat until the desired station is
received.
Tips
• If automatic tuning stops too frequently, turn on the
Local Seek to limit seek to stations with stronger
signals (see “Changing the sound and display
settings” on page 24).
• If you know the frequency of the station you want to
listen to, press and hold
(SEEK)
(+) or
(SEEK)
(–) to
locate the approximate frequency, then press
(SEEK)
(+) or
(SEEK)
(–) repeatedly to fine adjust to
the desired frequency (manual tuning).
If FM stereo reception is poor
Select monaural reception mode
(see “Changing the sound and display
settings” on page 24).
The sound improves, but becomes monaural
(“STEREO” disappears).
Tip
If FM broadcasts are difficult to hear, set DSO to
“OFF” (page 26).
Storing only the desired
stations
You can manually preset the desired stations on
any chosen number button.
1
Press
(SOURCE)
repeatedly to select
the radio.
2
Press
(MODE)
repeatedly to select the
band.
3
Press
(SEEK)
(+) or
(SEEK)
(–) to tune
in the station that you want to store.
4
Press the desired number button (
(1)
to
(6)
) for 2 seconds until “MEM”
appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
Tuning in a station through
a list
— List-up
(With the card remote commander)
1
During radio reception, press
(LIST)
.
The frequency or the name assigned to the
current station appears in the display.
2
Press
(DISC/PRESET)
(+) or
(DISC/PRESET)
(–) repeatedly until you
find the desired station.
If no name is assigned to the selected station,
the frequency appears in the display.
3
Press
(ENTER)
to tune in the desired
station.
