22
Changing the sound and
display settings
— Menu
The following items can be set:
(Set Up)
• Clock (page 9)
• CT (Clock Time) (page 18)
• Beep — to turn the beeps on or off.
• AUX-A (page 26) — to turn the AUX source
display on or off.
(Display)
• D.Info (Dual Information) — to display the
clock and the play mode at the same time (on).
• SA (Spectrum Analyzer) (page 25) — to
change the display pattern of the sound signal
level.
• Dimmer — to change the brightness of the
display.
– Select “Auto” to dim the display only when
you turn the lights on.
– Select “on” to dim the display.
– Select “off” to deactivate the Dimmer.
• Contrast — to adjust the contrast if the
indications on the display are not recognizable
because of the unit’s installation position.
• A.Scroll (Auto Scroll)
– Select “on” to scroll all automatically
displayed names exceeding 12 characters.
– When Auto scroll is set to off and the disc/
album/track is changed, the disc/album/track
name or ID3 tag does not scroll.
• Demo
– Select “on” to activate the Demo display.
The Demo display will appear about 10
seconds after the unit is turned off.
(Play Mode)
• Local on/off (Local seek mode) (page 14)
– Select “on” to only tune into stations with
stronger signals.
• Mono on/off (Monaural mode) (page 14)
– Select “on” to hear FM stereo broadcasts in
monaural. Select “off” to return to normal
mode.
• Regional on/off (page 16)
(Sound)
• EQ7 Tune (page 23) — to adjust the equalizer
curve.
• HPF (High pass filter) (page 24)
• LPF (Low pass filter) (page 25)
• Loudness — to enjoy bass and treble even at
low volumes. The bass and treble will be
reinforced.
• AUX Level (page 26) — to adjust the volume
level of connected auxiliary equipment.
1
Press
(MENU)
.
To set A.Scroll, press
(MENU)
during CD/
MD playback.
2
Press
M
or
m
repeatedly until the
desired item appears.
3
Press
<
or
,
to select the desired
setting (Example: “on” or “off”).
4
Press
(MENU)
.
After the mode setting is completed, the
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories by pressing
M
or
m
for 2 seconds.
