18
Changing the sound and
display settings
— Menu
The following items can be set:
SET (Set Up)
• CLOCK (page 9)
• BEEP — to turn the beeps on or off.
• RM (Rotary Commander) — to change the
operative direction of the controls of the rotary
commander.
– Select “NORM” to use the rotary commander
at the factory-set position.
– Select “REV” when you mount the rotary
commander on the right side of the steering
column.
• P.OUT-4.0V/5.5V— to change the pre-out of
the power amplifier to 4.0V or 5.5V. Selectable
only when the unit is turned off. (CDX-
CA720X only)
Note
If the volume is turned up very high when connected
to a power amplifier, the sound may be distorted. In
this case, set P.OUT to “4.0V.”
DSPL (Display)
• D.INFO (Dual Information) — to display the
clock and the play mode at the same time (ON).
• M.DSPL (Motion Display) — to select the
Motion Display mode from “1,” “2,” and
“OFF.”
– Select “1” to show decoration patterns in the
display and activate Demo display.
– Select “2” to show decoration patterns in the
display and deactivate Demo display.
– Select “OFF” to deactivate the Motion
Display.
• A.SCRL (Auto Scroll)
– Select “ON” to scroll all automatically
displayed names exceeding 8 characters.
– When A.SCRL is set to off and the disc/track
name is changed, the disc/track name does
not scroll.
• DIM (Dimmer) — to change the brightness of
the display. (CDX-CA720X only)
– Select “ON” to dim the display.
– Select “OFF” to deactivate the Dimmer.
P/M (Play Mode)
• LOCAL ON/OFF (Local seek mode) (page 13)
– Select “ON” to only tune into stations with
stronger signals.
• MONO ON/OFF (Monaural mode) (page 13)
– Select “ON” to hear FM stereo broadcast in
monaural. Select “OFF” to return to normal
mode.
• IF AUTO/WIDE (page 13)
SND (Sound)
• EQ7 TUNE (page 19) — to adjust the equalizer
curve.
• LOUD (Loudness) — to enjoy bass and treble
even at low volumes. The bass and treble will
be reinforced.
1
Press
(MENU)
.
To set A.SCRL, press
(MENU)
during CD/
MD playback.
2
Press either side of
(DISC/PRESET)
repeatedly until the desired item
appears.
3
Press the (+) side of
(SEEK)
to select
the desired setting (Example: “ON” or
“OFF”).
4
Press
(ENTER)
.
After the mode setting is completed, the
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories (“SET,”
“DSPL,” “P/M,” “SND,” and “EDIT”) by pressing either
side of
(DISC/PRESET)
for 2 seconds.
Summary of Contents for CDX-CA700X Installation/Connection
Page 55: ......
