background image

– 33 –

MG-310-153 

TU700  

14

5

8

12 

12 

12 

11

10 

F901 

13

6

SECTION 4

EXPLODED VIEWS

NOTE:

• The mechanical parts with no reference

number in the exploded views are not supplied.

• Items marked “*” are not stocked since

they are seldom required for routine service.
Some delay should be anticipated
when ordering these items.

• -XX and -X mean standardized parts, so

they may have some difference from the
original one.

• Color Indication of Appearance Parts

Example :

KNOB, BALANCE (WHITE) ... (RED)

Parts Color  Cabinet’s Color

• Accessories and packing materials are

given in the last of this parts list.

The components identified by
mark 

!

 or dotted line with mark.

!

 are critical for safety.

Replace only with part number
specified.

Ref. No.

Part No.

Description

Remark

4-1. CHASSIS SECTION

N

N

Ref. No.

Part No.

Description

Remark

*

1

3-034-437-01 COVER

2

3-376-464-11 SCREW (+PTT 2.6X6), GROUND POINT

*

3

A-3294-665-A MAIN BOARD, COMPLETE

*

4

3-034-438-01 BRACKET (IC)

*

5

3-034-441-01 HEAT SINK

6

7-685-793-09 SCREW +PTT 2.6X8 (S)

7

X-3377-240-1 PANEL ASSY, SUB

*

8

3-034-436-01 CHASSIS

*

9

3-034-455-02 SHEET (INSULATING)

10

1-776-207-31 CORD (WITH CONNECTOR) (POWER)

11

X-3367-636-1 LOCK ASSY

12

7-685-792-09 SCREW +PTT 2.6X6 (S)

13

7-621-772-10 SCREW +B 2X4

14

3-355-209-01 PLATE (B), GROUND

F901

1-532-877-11 FUSE (BLADE TYPE) (AUTO FUSE) 10A

TU700

A-3220-689-A TUNER UNIT (TUX-010/2(E))

Summary of Contents for CDX-3700



































Reviews: