Sony CDP-D12, Service Manual

Page: 16 / 54

1-8
CDP-D12
5. LO Motor sub assembly
1. Remove the CD mechanism deck assembly.
(Refer to item 1 of Section 1-4-1.)
2. Remove soldering of the LO motor assembly at the
two positions.
3. Remove the screw and remove the LO motor assem-
bly.
4. Remove the two precision screws and remove the LO
motor sub assembly from the bracket (motor).
5. Install the new LO motor sub assembly by reversing
the steps of removal.
6. Arm roller assembly
1. Remove the CD mechanism deck assembly.
(Refer to item 1 of Section 1-4-1.)
2. Remove the chassis (T388) assembly.
(Refer to item 2 of Section 1-4-1.)
3. Remove the tension coil spring (RA).
4. Remove the arm roller assembly in the direction of the
arrow.
5. Install the new arm roller assembly by reversing the
steps of removal.
PTT2 x 4
LO motor assembly
Red
White
Precision
P2
x 2
Bracket (motor)
LO motor sub assembly
Arm roller assembly
Tension spring (RA)