E:\JOB\3857686011CBKNC01SYE\02GB09C01-SY.fm
masterpage:Right
CBK-NC01
3-857-686-01 (1)
19
6
Open up the network connector
cover and connect the network
cable to the network connector.
Then secure the cable with the
cable hook.
• For safety, when connecting
external devices to this
connector, do not connect
connectors which may have
excessive voltage. Follow the
instructions in this manual when
making connections.
• When connecting the network
cable, make sure the connector
tab is correctly oriented.
On indicators
• When the power is supplied from the
camcorder, the POWER indicator
located below the network connector
lights up green.
• When the CBK-NC01 is connected
to the network, the ACT/LINK
indicator flashes green.
• When the network cable has a
transmission speed of 100BASE, the
10/100M indicator lights up orange.
When the network cable has a
transmission speed of 10BASE, the
indicator does not light up.
When disconnecting the
network cable
Press the connector tab towards the
connector as you disconnect the cable.
Ferrite core
15 mm
35 mm
Notes
