47
Using a USB Flash Drive / Specifications
Using a USB Flash Drive
You can connect a USB flash drive to the USB connector to
save and load data files.
The following Sony USB flash drives are recommended.
• USM512J
• USM1GL
• USM4GN
• USM4GL
• USM4GM
• USM8GJ
• USM8GN
• USM8GL
• USM8GQ
• USM16GLX
• USM32GL
• USM32GLX
• USM32GN
• USM32GR
• USM32GQ
• USM64GLX
• USM64GP
• USM64GQ
• USM4GS
• USM16GS
• USM16GR
• USM8GT
• USM16GU
• USM16GR
• USM4GV
• USM8GR
Notes
• USB flash drives other than those recommended may not be
recognized when connected to the USB connector.
• USB flash drives must be formatted with the FAT16 or
FAT32 file system. Recommended Sony USB flash drives
are preformatted, and can be used without any prior setup.
Specifications
CA4000
Design and specifications are subject to change without
notice.
General
Power requirement
240 V AC, 1.7 A (max.)
180 V DC, 1.0 A (max.)
13 V DC, 10.2 A (max.)
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Mass
Approx. 2.5 kg (5 lb 8.2 oz) (unit only)
Dimensions
147 × 221 × 350 mm
5
7
/
8
× 8
3
/
4
× 13
7
/
8
in. (W/H/D),
Input/output connectors
BPU
Optoelectrical connector (1)
AUX
12-pin (1)
VF-A
20-pin round type (1)
VF-B
26-pin rectangular type (1)
AUDIO IN
XLR 3-pin, female (1)
When the AUDIO is set to MIC: –60 dBu
(can be set to a value up to –20 dBu
using the menu or from the
HDCU2000/2500), balanced
When the AUDIO switch is set to LINE:
0 dBu, balanced
INTERCOM
XLR 5-pin, female (1)
DC IN
XLR 4-pin (1), 10.5 V to 17 V DC
DC OUT
4-pin (1), 10.5 V to 17 V DC, 0.5 A
(max.)
(Limitations may apply, depending on
the load and input conditions.)
SDI-MONI
BNC type (1)
PROMPTER1
BNC type (1), 1 Vp-p, 75
Ω
PROMPTER2/
MONITOR
BNC type (1), 1 Vp-p, 75
Ω
RET CTRL
6-pin (1)
REMOTE
8-pin (1)
TRACKER
10-pin (1)
USB
USB 2.0 type A, 4-pin (1)
(for connection USB flash drive)
Supplied accessories
Operation Guide (1)
OPERATION MANUAL (CD-ROM) (1)
Cable clamp belt (1)
Screws (+B3 × 8) (2)
Switch indicator label (1)
