Sony BVP-950 Series, Maintenance Manual, Page: 13 / 558

1-7 (E)
BVP-950 P1
1-3. Connectors and Cables
1-3-2. Connection Connector
Connection made with the connector panels during instal-
lation or service should be made with the connectors/
complete cable assemblies specified in the following list or
equivalent parts.
Connector name Connection connectors/cables
TEST OUT 1-569-370-12 Plug, BNC
(BNC)
REMOTE 1-766-848-11 Plug, 8P Male or
(8P FEMALE) 1-783-372-11 REMOTE cable
* 1 * 2
(Supplied with RM-B150, 10 m) or
CCA cable assembly (option)
CCA-5-10 (10 m)/CCA-5-3 (3 m)
* 2
MIC 1 1-508-084-00 XLR, 3P Male or
(3P FEMALE) ITT Cannon XLR-3-12C equivalent
* 1: The use of REMOTE cable enables to monitor video signals.
* 2: If using a cable of length different from a standard product, contact your
local Sony Sales Office/Service Center.
VF (20P FEMALE)
(EXTERNAL VIEW)
No. SIGNAL SPECIFICATIONS
1 NC No connection
2 ABNORMAL IND OUT H: Indicator lights
L: Indicator goes out
3 16:9 MODE OUT H: NORMAL (4:3)
L: WIDE (16:9)
4 NC No connection
5 COMP/VBS SW IN/OUT * Note4
6 CCIR/EIA OUT H: CCIR, L: EIA
7 NC No connection
8 G TALLY OUT H: Indicator lights
L: Indicator goes out
9 NC No connection
10 Y (X) OUT 1 V p-p, VF: Zi = 1.5 k Z
11 ZEBRA ON IN H: OFF, L: ON
12 VF VIDEO OUT (X) 1.0 V p-p, VF: Zi = 1.5 k Z
13 NC No connection
14 B-Y (X) OUT 700 mV p-p, VF: Zi = 1.5 k Z ,
75 % color bars
15 R-Y (X) OUT 700 mV p-p, VF: Zi = 1.5 k Z ,
75 % color bars
16 BATT IND OUT H: Indicator lights
L: Indicator goes out
17 TALLY IND OUT H: Indicator lights
L: Indicator goes out
18 + 9.3 V (VF) OUT REG + 9.3 V
19 GND GND
20 UNREG OUT + 10.5 V to 17.0 V
Note4
: Specification of COMP/VBS SW Signal
When powering on, the microcomputer of the camera identi-
fies a viewfinder in use by detecting the voltage at pin 5.
H: Color VF, L: B/W VF
.
In use of B/W VF
Voltage control of pin 5 is disabled during operation.
Switching between the return video signal and mono-
chrome signal for the viewfinder is done by the camera
and selected signal is output at pin 12 to the viewfinder.
.
In use of Color VF
By controlling the voltage at pin 5 during operation,
switching between the decoded return video signal and
the camera component signal is done in the viewfinder.
H: Camera, L: Return video