99
Storing the Settings of a Wipe, PIP, and Setting Menu Items
Cha
p
te
r 4
S
witc
h
ing Op
er
at
ion
6
Press the RECALL button.
The setting of a snapshot, wipe, or PIP stored in the selected register number
is recalled.
Direct recall function
If you light up the DIRECT RECALL button in step
4
, you can recall the setting
stored in one of register numbers 0 to 9 easily by pressing the corresponding
numeric button 0 to 9.
This direct recall function is convenient for you to switch the setting
instantaneously, as you can recall the stored setting with one press of the button.
Normally, the direct recall function allows you to recall snapshot data registered
in snapshot numbers 0 to 9. To recall snapshot data registered in a snapshot
number 11 or higher using the direct recall function, set the “Bank” on menu
page 945.
For details, see “To recall the snapshot number using the DIRECT RECALL
button (menu page 945)” on page 139.
Note
