Sony BRC-X400, Operating Instructions Manual, Page: 6 / 104

6
Precautions for Preventing
Access to the Camera by an
Unintended Third Party
The camera settings may be changed by an
unintended third party on the network,
depending on the usage environment.
The camera can be fraudulently accessed in a
network environment where a device is
connected or connectable to the network
without the administrator’s permission, or where
a computer or other network device connected
to the network can be used without any
permission.
After configuring the camera, immediately
change the password you use for upgrading the
firmware on the camera, from a Web browser on
your computer, and for changing settings. For
how to change password, see “Changing the
Initial Password” (page 58).
Features
Pan/Tilt/Zoom CMOS video camera
equipped with a small built-in pan-tilt
head
• The camera unit is equipped with a 1/2.5-type
Exmor R CMOS sensor and an optical zoom
lens*
1
with pan/tilt/zoom features integrated
into a small built-in pan-tilt head. This versatile
camera can be used for various applications.
• The pan-tilt head can pan to the right or left by
170 degrees and tilt upward to 90 degrees and
downward to 20 degrees, which allows the
camera to remotely shoot wide areas.
• The camera pans and tilts at a speed of
between 0.5 and 101 degrees (maximum
speed) per second, and it also pans and tilts at
a maximum speed of 300 degrees per second
in the preset operation.
Zoom performance for capturing distant
subjects
For BRC-X400/X401 and SRG-X402, in addition to
20×*
1
optical zoom, it uses Sony's 2×*
2
Clear
Image Zoom function and 2× Tele Convert
mode*
2
to achieve the equivalent of up to 80x
optical telephoto performance. Moreover, using
digital zoom together achieves the equivalent of
up to 480x telephoto performance.
Audio output
The camera is equipped with 2ch audio which is
applicable for microphone/line input.
Input audio signal is transmitted to HDMI/SDI
simultaneously. Additionally, the signal is
transmitted to the IP network by with the
streaming function.
Video output
In addition to HDMI/SDI output, IP network
transmission can be performed simultaneously
by streaming function (SDI output does not
support 4K).
For streaming function, ITU-T H.264/H.265 is
applied to video compression mode (video
codec) and it achieves high compression rate
while keeping the image quality. Also, it
decreases the network bandwidth load.
The network bandwidth load required for video
transmission decreases.
Moreover, the camera supports multi-streaming
output. Up to 3 codec modes can be selected.