Sony BRC-X400, Operating Instructions Manual, Page: 27 / 104

27
Pan/Tilt Operation
1
Press the POWER button.
The camera will turn on and perform the
pan/tilt reset action automatically.
2
Press an arrow button to pan or tilt the
camera.
While checking the picture on the screen,
press the appropriate arrow button.
To move the camera little by little, press the
button just for a moment.
To move the camera in a wide range, press
and hold the button.
To move the camera diagonally, press the

or

button while holding down the

or

button.
To face the camera back to the front
Press the HOME button.
If you accidentally move the camera
with your hand
Press the PAN-TILT RESET button to perform the
pan/tilt reset action.
When the camera moves in a different
direction from what you intended
The camera is preset to face toward the right
whenever the

button is pressed. You might
wish to reverse the direction in which the camera
moves, for example, when you change the
direction of the camera while checking the
picture on the screen. In such cases, press the 2
(REV) button while holding down the L/R
DIRECTION SET button. To reset the setting, press
the 1 (STD) button while holding down the L/R
DIRECTION SET button.
Note
The above setting changes only the signal
emitted from the remote commander, and does
not change the setting of the camera itself.
Therefore, repeat the setting process for each
remote commander if you are using more than
one remote commander.
If the POWER lamp and NETWORK lamp
on the camera flash simultaneously, and
“PAN-TILT ERROR!” is displayed on the
menu screen
If the camera is moved by external shock, or
objects or your fingers are caught in the camera,
the microcomputer inside the camera may not
be able to store the pan/tilt position properly, in
which case the motion automatically stops.
To reset the pan/tilt position, press the PAN-TILT
RESET button or turn off the camera and turn it
on again.
Arrow
button
Movement of the
camera
Setting
While holding down
Press
While holding down
Press