Usi
ng the
Me
nu
31
GB
Assigns a name to any equipment connected to the side and rear sockets. The name will be
displayed briefly on the screen when the equipment is selected. You can skip an input source
that is not connected to any equipment.
1
Press OK to select “AV Preset”.
2
Press
M
/
m
to select the desired input source, then press OK.
3
Press
M
/
m
to select the desired option below, then press OK.
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press PROG +/- to select
the programme number with the channel. You cannot select a programme number that is set
to skip (page 33).
1
Press OK to select “Manual Programme Preset”.
2
Press
M
/
m
to select one of the following options, then press OK.
AV Preset
Option
Description
Equipment labels
Uses one of the preset labels to assign a name to connected
equipment.
Edit
Creates your own label. Follow steps 3 to 5 of “Programme Labels”
(page 30).
Skip
Skips an input source that is not connected to any equipment when
you press
M
/
m
to select the input source.
Manual Programme Preset
Continued
Summary of Contents for BRAVIA KLV-W40A10E
Page 83: ......
