Sony Bravia KLV-40ZX1, Operating Instructions Manual

Page: 4 / 183

4
GB
Start-up Guide
1: Checking the unit and
accessories
Monitor (1)
Media receiver (1)
AC power cord for monitor
AC power cord for AC adaptor
AC adaptor for media receiver (1)
Remote RMF-GA001 (1)
Size AA batteries (R6 type) (2)
IR Blaster (Y-cable) (2)
Stand for media receiver (1)
Terminal cover (1)
Spacers (black) (4)
Table-Top Stand (1) and screws M5 × 8 (4)
Stand Support adaptor (1)
2: Installing the TV
The following steps must be performed to
correspond with the installation steps in the
instruction manual of the optional accessories.
Follow the instructions in this manual
referring to the instruction manual supplied
with the accessories.
Installing on a TV stand
1
Remove the Table-Top Stand, accessory
box and accessory bag from the carton.
The screws and booklet can be found in
the accessory bag attached on the rear of
the monitor.
For product protection and safety reasons,
Sony strongly recommends that you use
the screws provided with the display.
~
• Do not remove the blue tape that secures the
plate on the rear of the monitor until you
finish installing the Table-Top Stand.
Table-Top Stand
Accessory box
Monitor
Accessory bag