18
GB
Connect to
Input symbol on
screen
Description
1
LAN
You can enjoy contents stored in DLNA-compatible devices
via a network (page 27).
2
HDMI IN 1, 3, 4
or 2
HDMI 1,
HDMI 3,
HDMI 4 or
HDMI 2
Digital video and audio signals are input from the connected
equipment.
In addition, when you connect the equipment that is
compatible with control for HDMI, communication with the
connected equipment is supported. Refer to page 39 to set up
this communication.
If the equipment has a DVI jack, connect the DVI jack to the
HDMI IN 1 jack through a DVI - HDMI adaptor interface
(not supplied), and connect the equipment’s audio out jack to
the audio in jack in the HDMI IN 1 jacks.
~
• The HDMI jacks support the following video inputs only:
480i, 480p, 576i, 576p, 720p, 1080i, 1080p and 1080/24p.
• Be sure to use only an authorised HDMI cable bearing the
HDMI logo. We recommend that you use a Sony HDMI
cable (high speed type).
3
PC IN
(RGB)/
PC
It is indispensable to use a PC cable with ferrite cores.
4
DMPORT
DMPORT
You can play audio or video (optional cable required) of a
portable audio player that is connected to the TV using a
DIGITAL MEDIA PORT (DMPORT) adaptor.
Depending on the connected DIGITAL MEDIA PORT
adaptor, you can operate the connected equipment using the
TV as follows;
– Using the remote of the TV:
F
/
f
/
G
/
g
, ,
RETURN
,
N
/
x
/
X
/
m
/
M
/
.
/
>
.
– Using the OPTIONS menu function: Press
OPTIONS
, and
select “Device Control (Menu)”.
~
• Do not connect or disconnect a DIGITAL MEDIA PORT
adaptor while the TV is turned on.
• The connected equipment is not powered when the TV is
turned off or in standby mode.
5
USB
You can enjoy photo/music files stored in a Sony
digital still camera or camcorder through a USB cable
or USB storage device on your TV
6
2, and
2
Video 2
If you connect a mono equipment, connect to the L (MONO)
jack
2.
7
i
Headphones
You can listen to TV sound through headphones.
8
1 or
1 or
3, and
1 or 3
Video 1 or
Video 3
To avoid picture noise, do not connect the camcorder to the
video jack
1 and the S video jack
1 at the same time.
If you connect a mono equipment, connect to the L (MONO)
jack
1 or 3.
9
/
Use to record the analogue video and sound from TV to a
DVD recorder or VCR. To turn off the sound of the TV
speakers, set “Speaker” to “Audio System” (page 38). If you
connect a mono equipment, connect to the L jack
.
~
• The monitor output jacks cannot support HD/DVD, HDMI
and PC signals source pictures, also digital audio signal for
sound.
Summary of Contents for bravia klv-40x450a
Page 97: ......
