9
GB
D:\SONY TV\SY140238_SE2_SE2N_PAA_IM\4562312111\040CTI.fm
masterpage: Right
KLV-48R562C / 48R552C / 40R562C / 40R552C / 32R562C / 32R512C / 32R502C / 32R412C
4-562-312-
11
(1)
C
o
nne
c
tion
TV t
o
the Int
e
rn
e
t
GB
Setting up the Internet
Connection
Using the network feature you can connect the
TV to the Internet. The set-up procedure differs
depending on the type of network and LAN
router. Before setting up the Internet
connection, be sure to set up a LAN router.
Check your wireless LAN environment using the
following chart.
Wireless LAN
* Type 1 is easier to set up if your router has an
automatic setting button, e.g. Air Station One-Touch
Secure System (AOSS). Most of the latest routers have
this function. Check your router.
Type 1:
Follow the configuration for
Secured
network with Wi-Fi Protected Setup™
(WPS)
.
Type 2:
Follow the configuration for
Secured
network without Wi-Fi Protected
Setup™ (WPS)
.
Type 3:
Follow the configuration for
Unsecured
network with any type of wireless
LAN router
.
Type 4:
Follow the configuration for
Wired
network set-up
.
The WPS standard makes security of a wireless
home network as straightforward as pressing
the WPS button on the wireless LAN router.
Before setting up a wireless LAN, check the
location of the WPS button on the router and
verify how to use it.
For security purpose, [WPS (PIN)] provides a PIN
code for your router. PIN code is renewed every
time you select [WPS (PIN)].
1
Press
HOME
, then select [Settings]
[System Settings]
[Set-up]
[Network]
[Network Set-up].
2
IP Address setting/Proxy server:
– automatic setting:
[Set up network connection]
[Easy]
– manual setting:
[Set up network connection]
[Expert]
[Wireless Set-up]
3
Select [WPS (Push Button)] for Push
Button method or [WPS (PIN)] for PIN
method.
Note
Button name of the WPS may differ depending on
the router (e.g. AOSS button).
4
Follow the instructions on the set-up
screen.
Note
• If you use WPS for network set-up, the security
settings of the wireless LAN router activate, and any
equipment previously connected to the wireless LAN
in a non-secure status will be disconnected from the
network.
In this case, activate the security settings of the
disconnected equipment and then reconnect. Or, you
can deactivate the security settings of the wireless
LAN router, and then connect the equipment to a TV
in a non-secure status.
• To use the network with IPv6, select [Settings]
[System Settings]
[Set-up]
[Network]
[IPv6/IPv4 Priority]
[IPv6], then select [Easy] in
[Set up network connection].
• When IPv6 is selected, HTTP Proxy cannot be set.
Connection TV to the Internet
(except KLV-32R412C)
Secure Wireless LAN?
NO
k
Type 3
YES
m
Do you use a wireless LAN
router compatible with Wi-Fi
Protected Setup™ (WPS)?
NO
k
Type 2
YES
m
Type 1
*
Wired LAN
,
Type 4
Type 1: Secured network with Wi-Fi
Protected Setup™ (WPS)
