41
Using
Me
nu F
unc
tions
Clock/Timers
“Sleep Timer”
Set the time in minutes (“Off”, “15”, “30”, “45”, “60”, “90”, or “120”) that you
would like the TV to remain on before shutting off automatically.
“On Timer”
Turns on the TV from standby mode at a time you set, and tuned to a channel
or input of your preference or photo frame mode. Before setting this function,
make sure you set the correct current Time.
“Clock Set”
Set the current time manually. This can be set from “Initial Set-up”/”Auto Start-
up” or “Clock/Timers”.
• If the time information can be obtained by broadcast signal, you cannot change
the time manually.
Auto Start-up
Starts the initial set-up procedure (page 7). This option allows you to retune the
TV after moving house, or to search for new channels that have been launched
by broadcasters.
Language
Selects the language in which the menus are displayed.
Start-up Logo
Select “On” to display the logo when the TV is turned on.
Select “Off” to disable it.
AV Set-up
“Video Labels”
Assigns name to external equipment. Select “Auto” to display names only when
the equipment is connected, or “Always” to display regardless of connection
status. When the input source is PC, you can select “Off”.
“Video 1/Component Input”
Select “Auto” to have the TV detect and switch between the component video
jack
or the video jack
1 when component video jack
or video jack
1 is connected.
• You cannot use the component video jack
and the video jack
1 at the
same time.
“Headphone/Audio Out”
Sets the sound output to headphones or external audio system connected to
the TV.
Disconnect headphones from the TV when you select “Audio Out”.
HDMI Set-up
Allows the TV to communicate with equipment that is compatible with the
Control for HDMI function, and connected to the HDMI jacks of the TV. Note
that communication settings must also be made on the connected equipment.
“Control for HDMI”
Sets whether or not to link the operations of the TV and the connected
equipment that is compatible with Control for HDMI. When set to “On”, the
following functions are available.
If the specific Sony equipment that is compatible with Control for HDMI is
connected, this setting is applied to the connected equipment automatically
when the “Control for HDMI” is set to “On” using the TV.
“Auto Devices Off”
When this is set to “On”, the connected equipment that is compatible with
Control for HDMI turns off when you turn off the TV by remote.
“Auto TV On”
When this is set to “On”, the TV turns on when you turn on the connected
equipment that is compatible with Control for HDMI.
“HDMI Device List”
Displays a list of connected equipment that is compatible with Control for
HDMI.
Selects “Enable” to update the “HDMI Device List”.
(Continued)
