Getting Started
20
KDL-52XBR2/KDL-52XBR3
2-892-388-
11
(1)
D:\WINNT\Profiles\fujii\Desktop\temp out\FIX EN
52\2892388111\01US03INS.fm
masterpage:3 columns Right
Setting Up the Channel List – Initial Setup
After you finish connecting the TV, you can run the
Initial Setup
to create a
list of available analog and digital channels. The
Initial Setup
screen
appears when you turn on the TV for the first time after hooking it up.
1
Press
to turn on the TV.
The
Initial Setup
screen appears.
2
Press
V
/
v
to highlight the on-screen
display language. Then press
. The
message “Start auto program now?”
appears.
3
Press
V
/
v
to highlight “Yes” then press
.
Auto Program
performed through
Initial Setup
will automatically create a
list of receivable channels from both VHF/UHF antenna and cable TV
channels if both sources are connected.
If you choose to set up the channels at a later time, select the
Auto Program
option in the
Channel
settings to scan available channels (see page 39).
✍
If you select “No” during Initial Setup, the Initial Setup screen will
reappear each time you turn on the TV until you complete Auto
Program.