background image

23

GB

Addit

iona

l Info

rm

atio

n

Safety 
Information

Installation/Set-up

Install and use the TV set in accordance 
with the instructions below in order to 
avoid any risk of fire, electrical shock or 
damage and/or injuries.

Installation

• The TV set should be installed near an 

easily accessible AC power outlet.

• Place the TV set on a stable, level surface 

to avoid it from falling down and cause 
personal injury or damage to the TV.

• Only qualified service personnel should 

carry out wall installations.

• For safety reasons, it is strongly 

recommended that you use Sony 
accessories, including:

Wall-mount bracket 
SU-WL500 (except KDL-52/
40NX800, KDL-46/40NX700)
SU-WL50B (except KDL-60/
55NX815, KDL-60/55NX810)
SU-WL700 (except KDL-
60NX815, KDL-60NX810, KDL-
60NX800)

Wall-hanging bracket 
SU-WH500

TV Stand 
SU-B550S (KDL-55NX815/KDL-
55NX810)
SU-B460S (KDL-46NX710)
SU-B400S (KDL-40NX710)
SU-52NX1 (KDL-52NX800)
SU-46NX1 (KDL-46NX700)
SU-40NX1 (KDL-40NX800/
40NX700)

• Be sure to use the screws supplied with 

the Wall-mount bracket when attaching 
the mounting hooks to the TV set. The 
supplied screws are designed so that they 
are 8 mm to 12 mm in length when 
measured from the attaching surface of 
the mounting hook. 
The diameter and length of the screws 
differ depending on the Wall-mount 
bracket model. 
Use of screws other than those supplied 
may result in internal damage to the TV 
set or cause it to fall, etc.

Transporting

• Before 

transporting the 
TV set, 
disconnect all 
cables.

• Two  or  three 

people are 
needed to 
transport a large 
TV set.

• When transporting the TV set by hand, 

hold it as shown on the right. Do not put 
stress on the LCD panel and the frame 
around the screen.

• When lifting or moving the TV set, hold 

it firmly from the bottom.

• When transporting the TV set, do not 

subject it to jolts or excessive vibration.

• When transporting the TV set for repairs 

or when moving, pack it using the 
original carton and packing material.

Ventilation

• Never cover the ventilation holes or 

insert anything in the cabinet.

• Leave space around the TV set as shown 

below.

• It is strongly recommended that you use 

a Sony wall-mount bracket in order to 
provide adequate air-circulation.

Installed on the wall

Installed with stand

• To ensure proper ventilation and prevent 

the collection of dirt or dust:

Do not lay the TV set flat, install 
upside down, backwards, or 
sideways.

Do not place the TV set on a shelf, 
rug, bed or in a closet.

Do not cover the TV set with a 
cloth, such as curtains, or items 
such as newspapers, etc.

Do not install the TV set as shown 
below.

AC power cord

Handle the AC power cord and outlet as 
follows in order to avoid any risk of fire, 
electrical shock or damage and/or injuries:

Use only Sony supplied AC power 
cords, not those of other brands.

Insert the plug fully into the AC power 
outlet.

Operate the TV set on a 110–240 V AC 
supply only.

When wiring cables, be sure to unplug 
the AC power cord for your safety and 
take care not to catch your feet on the 
cables.

Disconnect the AC power cord from 
the AC power outlet before working on 
or moving the TV set.

Keep the AC power cord away from 
heat sources.

Unplug the AC power plug and clean it 
regularly. If the plug is covered with 
dust and it picks up moisture, its 
insulation may deteriorate, which could 
result in a fire. 

Notes

• Do not use the supplied AC power cord 

on any other equipment.

• Do not pinch, bend, or twist the AC 

power cord excessively. The core 
conductors may be exposed or broken.

• Do not modify the AC power cord.
• Do not put anything heavy on the AC 

power cord.

• Do not pull on the AC power cord itself 

when disconnecting the AC power cord.

• Do not connect too many appliances to 

the same AC power outlet.

• Do not use a poor fitting AC power 

outlet.

Prohibited Usage

Do not install/use the TV set in locations, 
environments or situations such as those 
listed below, or the TV set may 
malfunction and cause a fire, electrical 
shock, damage and/or injuries.

Location:

Outdoors (in direct sunlight), at the 
seashore, on a ship or other vessel, inside a 
vehicle, in medical institutions, unstable 
locations, near water, rain, moisture or 
smoke.

Environment:

Places that are hot, humid, or excessively 
dusty; where insects may enter; where it 
might be exposed to mechanical vibration, 
near flammable objects (candles, etc). The 
TV set shall not be exposed to dripping or 
splashing and no objects filled with liquids, 
such as vases, shall be placed on the TV.

Situation:

Do not use when your hands are wet, with 
the cabinet removed, or with attachments 
not recommended by the manufacturer. 
Disconnect the TV set from AC power 
outlet and antenna during lightning storms.

Mounting Hook

Hook attachment on rear 
of TV set

Screw (supplied with the 
Wall-mount bracket)

8 mm - 12 mm

30 cm

10 cm

10 cm

10 cm

Leave at least this space around 
the set.

30 cm

10 cm

6 cm

Leave at least this space around 
the set.

10 cm

Air circulation is blocked.

Wall

Wall

(Continued)

Summary of Contents for BRAVIA KDL-52NX800





























Reviews: