34
Using the Channel Menu
Favorites
Lets you set up a list of up to eight of your favorite channels or inputs.
Press
V
/
v
to select the
Add to Favorites
option and press
to add the current channel or
input to your
Favorites
list.
To select a favorite channel or input from the list, press
V
/
v
to go through the list and
to
select.
• To exit press
.
• To quickly access the
Favorites
list, press
when there is no menu on the screen.
Cable
On
Select if you are receiving cable channels via cable TV provider.
Off
Select if you are using an antenna.
Add Digital Channels
Select to add digital channels without replacing the original channel list. Be sure to set
Cable
setting to
On
or
Off
in
Channel
menu for the correct type of input signal you choose.
Auto Program
Automatically sets up the channel list on the TV for all receivable channels (Digital and
Analog).
• Before starting
Auto Program
, be sure to select
On
or
Off
for the
Cable
option under
the
Channel
menu. When it is
On
, the TV will search for cable channels; when it is
Off
,
the TV will search for over-the-air signals with an antenna connection.
• If you are using an A-B RF switch (not supplied) to switch between cable or antenna
connection, be sure to select the correct
Cable
option to
On
or
Off
in the
Channel
Menu.
1
Select
Auto Program
.
2
Select
OK
to start
Auto Program
. When
Auto Program
is done, select
OK
.
~
• IMPORTANT: You must perform
Auto Program
after cable or antenna is
connected. If you cancel
Auto Program
before completion, some channels may not
be available.
Show/Hide Channels
Allows you to show or hide channels that appear when you use the
CH +/–
button.
1
Press
V
/
v
to scroll through the channels until you find the channel you want to show or
hide.
2
Press
to determine if the channel will be shown or hidden.
• To show or hide more channels, repeat steps 1-2.
Label Channels
Allows you to assign labels to channel numbers.
1
Press
V
/
v
to scroll through the channel numbers. Then press
to select the channel
number that you want to assign a label.
2
Press
B
/
b
/
V
/
v
to move through the label characters (A-Z, 0-9) and press
to select
it. To move to the next character press
B
/
b
/
V
/
v
. Repeat to add up to 7 characters to the
label. Then select
on screen to set it. To assign labels to more channels, repeat
steps 1-2.
• To delete a character select
on screen.
• To have a space between characters select
on screen.
• To exit press
.
Diagnostics
Allows to confirm the current signal performance.
MENU
FAVORITE
S
