Sony bravia KDL-40WE5 Operating Instructions Manual Download Page 32

Page: 32 / 56

Presence Sensor

(for

KDL-46WE5/40WE5
only)

When no presence is detected in front of TV, the TV switches to picture off mode
automatically. Additionally, when no presence is detected after 30 minutes in
picture off mode, the TV switches to standby mode.

• Even if a person is in front of the TV, the sensor may work if the person does not

move. The sensor may not work when the temperature changes due to the air
conditioning, etc.

Idle TV Standby

Turns the TV off after it has been kept idle for the preset length of time.

PC Power
Management

Switches the TV to standby mode when the TV receives no signal from the PC
input source for 30 seconds.

Light Sensor

Automatically optimises the picture settings according to the ambient light in the
room.

• Do not put anything over the sensor, doing so may affect its function. See page 14

to check the position of the sensor.

Picture

Target Inputs

Allows you to select whether to use the common settings or to make custom
settings for the input you are currently viewing.

Common

Applies common settings to all inputs in which “Target
Inputs” is set to “Common.”

Name of current
input (e.g. Video
1)

Allows you to make custom settings for the input.

Picture Mode

Sets a picture mode. The options that can be selected differ depending on the
“Scene Select” settings.

Vivid

Enhances picture contrast and sharpness.

Standard

For standard pictures. Recommended for home
entertainment.

Custom

Allows you to store your preferred settings.

Cinema

For viewing film-based content. Most suitable when viewing
the TV in a theatre-like environment.

Photo-Vivid

For viewing photographs. Enhances picture contrast and
sharpness.

Photo-Standard

For viewing photographs. Provides the optimum picture
quality for viewing in the home.

Photo-Original

For viewing photographs. Represents the picture quality used
when imaging developed photographs.

Photo-Custom

For viewing photographs. Allows you to store your preferred
settings.

Sports

Provides the optimum picture quality for viewing sports.

Game

Most suitable for when playing games on your TV.

Graphics

Provides the optimum picture quality for viewing graphics.

Reset

Resets all the “Picture” settings to the factory settings excluding “Target Inputs,”
“Picture Mode” and “Advanced Settings.”

Backlight

Adjusts the brightness of the backlight.

Picture

Increases or decreases picture contrast.

Summary of Contents for bravia KDL-40WE5

























































Search results

Summary of Contents for bravia KDL-40WE5

Reviews:

Related manuals for bravia KDL-40WE5

Brands by name

Popular brands

Sony bravia KDL-40WE5, Operating Instructions Manual

Search results

Summary of Contents for bravia KDL-40WE5

Reviews:

Related manuals for bravia KDL-40WE5

Brands by name

Popular brands