18
KDL-22L4000
KDL-22L4000
2-2. REVIEWING SERVICE (FACTORY) MODE
All of the necessary adjustment are contained in the boards for these models, therefore the following information is for informational purposes.
Factory Mode
Input Source
<[
TV ]>
White Balance
<[
Off
]>
Internal Pattern
<[
20 ]>
Color Temp.... >>
Aging Mode
<[
Off
]>
ADC Calibration
>>
Auto
Phase
<[
Off
]>
Factory Reset
<[
Off
]>
EDED WP
<[ Protection ]>
User Reset
<[
Off
]>
Recall Preset Ch
<[
Off
]>
[</>]Set[EXIT]Exit
Change source between
Video1,Video2 ,Component, PC, HDMI, & TV
Set “On” for White Balance adjust
Reset TV to Factory Defauts without resetting
Parental lock , Channel lists and other User settings.
Set “On” for Aging mode start
Set “Off” to end aging mode.
Reset to Factory Defaults
To scan preset channels from
cable or antenna
To Exit Service Mode, press
2-3. RESETTING TO FACTORY DEFAULTS AFTER BOARD REPLACEMENT
Traditional Service Mode is not available in this chassis, however, after replacing a board you should reset all of the settings to the Factory Default
from Service (Factory) Mode.
CAUTION
: Resetting the TV to the Factory Defaults will
over-write all customer settings
including Parental Lock setting
.
Before performing this reset,
contact the customer to determine what adjustments they have made.
1. TV must be in Service (Factory) Mode.
2. Press to select
Factory Reset
.
3. Press
to select
Yes
.
4. When the Reset is complete, the text changes to
No
.
5. To exit “service mode”, press the
button