39
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-
xx
(x)
Using
Me
nu F
unc
tions
Programme
Sorting
Allows you to remove or change the order of digital channels
stored in the TV.
1
Press
F
/
f
to select the channel you want to remove or
move to a new position.
2
Remove or change the order of the digital channels as
follows:
To remove a digital channel
Press . After a confirmation message appears, press
G
to select “Yes”, then press .
To change the order of the digital channels
Press
g
, then press
F
/
f
to select the new position for the
channel and press
G
.
3
Press
RETURN
.
Digital Manual
Tuning
Tunes the digital channels manually. This feature is available
when “Digital Auto Tuning” is set to “Antenna”.
1
Press the number buttons to enter the channel number
you want to tune, or press
F
/
f
.
2
When the available channels are found, press
F
/
f
to
select the channel you want to store, then press .
3
Press
F
/
f
to select the channel number where you want
to store the new channel, then press .
Repeat the above procedure to tune other channels.
LNA
Improves the picture quality of the channel (noisy picture)
when the broadcast signal is very weak.
Radio Display
Displays the screen wallpaper when you listen to a radio broadcast. You can select
the screen wallpaper colour, display a random colour or view a slideshow (page 21,
26). To cancel the screen wallpaper display temporarily, press any button.
Parental Lock
Sets an age restriction to viewing. To view any programme rated for ages above
the age you specify, enter the correct PIN code.
PIN Code
Enter your PIN code to activate “Parental Lock”. You can also change the PIN
code.
z
• PIN code 9999 is always accepted.
Technical Set
up
Auto Service
Update
Enables the TV to detect and store new digital services as
they become available.
System Update
Enables the TV to automatically receive free software
updates through your existing aerial/antenna/cable (when
issued). We recommend that you leave the setting to “On” at
all times.
System
Information
Displays the current software version and the signal level.
Time Zone
Allows you to manually select the time zone you are in, if it is
not the same as the default time zone setting for your country/
area.
Auto DST
Select “On” to automatically switch between summer time
and winter time according to the calendar.
Service
Replacement
Select “On” to automatically change the channel when
broadcaster changes transmission of the viewing programme
to a different channel.
CA Module Set-up
Provides access to a pay TV service after you obtain a Conditional Access Module
(CAM) and a view card. See the location of the
(PCMCIA) socket (page 18).