Sony Bravia KD-55XG70 Series, Reference Manual

Page: 13 / 44

13 US
US
Installing the TV to the Wall
This TV’s instruction manual only provides the steps to prepare the TV for Wall-Mount
installation before it is installed on the wall.
Your TV can be mounted on a wall using a Wall-Mount Bracket (not supplied) out of the box
as packaged. If the Table-Top Stand is attached to the TV, the TV may require detaching the
Table-Top Stand; see page 15 (Detaching the Table-Top Stand from the TV).
Prepare the TV for the Wall-Mount Bracket before making cable connections.
For product protection and safety reasons, Sony strongly recommends that installation of
your TV on the wall be performed by qualified professionals. Do not attempt to install it
yourself.
• Follow the instruction guide provided with the Wall-Mount Bracket for your model.
Sufficient expertise is required in installing this TV, especially to determine the
strength of the wall for withstanding the TV’s weight.
• The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount
Bracket thickness. Please refer to below illustration.
• Be sure to store the unused screws and Table-Top Stand in a safe place until you are
ready to attach the Table-Top Stand. Keep the screws away from small children.
Note Note
• Read the supplied Safety Booklet for additional safety information.
• You can remove the foot parts and screws after the TV is completely installed to the wall.
• Be sure to store the removed foot parts and screws in a safe place, keeping them away from children.
• Be sure to attach the foot parts and screws at original position when using the Table-Top Stand. If using an
electric screwdriver, set the torque at approximately 0.4 N·m {4 kgf·cm}.
Wall-Mount Bracket
Screw (M6)
10 mm - 14 mm
TV’s rear cover
Foot part
Screw