D:\SONY TV\SY130236_F30 (Rev-1)\4477658121_GB\GB06OPT.fm
KD-X8504A
4-477-658-
12
(1)
26
GB
~
•
Attach the Pulleys and Screws (+PSW 6 x 20) to the upper rear of the TV.
•
Attach the Band and Spacers with Screws (+PSW 6 x 50) to the lower rear of the TV.
•
If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
•
Screw (+PSW 4 x 20)
D
, Bush (M4)
H
and Screw (+PSW 4 x 50)
I
will not be used depends on model. Be
sure to store the unused parts in a safe place for future use. Retain this manual for future reference.
•
Before mounting the TV to the wall, detach the Table-Top Stand from the TV. See “Detaching the Table-Top
Stand from the TV” (page 7) for details.
•
When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original
holes on the rear of the TV.
x
SU-WL50B
SU-WL400
Screw and Hook locations diagram/table
Model Name KD-
Screw location
Hook location
SU-WL50B
SU-WL400
SU-WL50B
SU-WL400
65X8504A
d, i
-
a
-
55X8504A
-
-
-
a
×
4
Screw (+PSW 6 x 20)
C
Pulley
B
Spacer
E
Band
F
Screw (+PSW 6 x 50)
G
Stand
Cover *
*
After mounting the TV to the
wall, tilt the TV to the front to
detach the Stand Cover from
the TV.
a
b
c
c
b
a
Screw location
When installing the Mounting Hook on the TV.
Hook location
When installing the TV onto the Base Bracket.
Mounting Hook
Base Bracket
a
b
c
