Se
ttings
59
US
[JACKET PICTURE]: The jacket picture (still
picture) appears, but only when the jacket
picture is already recorded on the disc (CD-
EXTRA, etc.). If the disc does not contain a
jacket picture, a preset picture stored in the
system appears.
[GRAPHICS]: A preset picture stored in the
system appears.
[BLUE]: The background is blue.
[BLACK]: The background is black.
x
[PARENTAL CONTROL]
The [PARENTAL CONTROL] function allows
you to restrict playback of DVDs that have
ratings. Scenes may be blocked or replaced with
different scenes.
1
Enter or re-enter your 4-digit password
using the number buttons, then press
.
2
Press
X
/
x
to select [STANDARD], then
press .
3
Press
X
/
x
to select a geographic area
as the playback limitation level, then
press .
When you select [OTHERS
t
], select and
enter a standard code from “Parental
Control Area Code List” (page 74) using
the number buttons.
4
Press
X
/
x
to select [LEVEL], then press
.
5
Press
X
/
x
to select the desired level,
then press
.
The lower the value, the stricter the
limitation.
To turn off the [PARENTAL CONTROL]
function
Set [LEVEL] to [OFF] in Step 5.
To play a disc for which [PARENTAL
CONTROL] is set
When you load the disc and press
N
, the
display for entering your password appears.
Enter your 4-digit password using the number
buttons, then press
.
Tip
• If you forget your password, enter “199703” using
the number buttons, then press
. The display will
ask you to enter a new 4-digit password. After you
enter a new 4-digit password, replace the disc in the
unit and press
N
. When the display for entering your
password appears, enter your new password.
Changing the password
1
Enter your 4-digit password using the
number buttons, then press
.
2
Press
X
/
x
to select [CHANGE
PASSWORD
t
], then press
.
3
Enter a new 4-digit password using the
number buttons, then press
.
If you make a mistake entering your
password, press
C
before you press
,
then input the correct number.
4
To confirm your password, re-enter it
using the number buttons, then press
.
x
[MULTI-DISC RESUME]
This system recalls the point where you stopped
the disc the last time it was played and resumes
playback from that point the next time you insert
the same disc.
[ON]: The system stores the resume points in
memory for up to 10 discs.
[OFF]: The system does not store the resume
points in memory. Playback restarts at the
resume point only for the current disc in the unit.
Note
• When the resume playback memory is full, the
resume playback point for the earliest disc is deleted.
x
[RESET]
You can return the [SETUP] settings other than
[PARENTAL CONTROL] to the default
settings.
Press
C
/
c
to select [YES], then press
.
You can also quit the process and return to the
Control Menu by selecting [NO] here.
Do not press
[/1
while resetting the system as
it takes a few seconds to complete.
Note
• The [MEDIA], [INTERVAL], [EFFECT], and
[MULTI/2CH] settings also return to the default
settings.
