![Sony BDP-CX7000ES - 400 Blu-ray Disc Mega Changer Operating Instructions Manual Download Page 19](http://html.mh-extra.com/html/sony/bdp-cx7000es-400-blu-ray-disc-mega-changer/bdp-cx7000es-400-blu-ray-disc-mega-changer_operating-instructions-manual_391629019.webp)
19
US
Ge
tt
in
g
S
ta
rte
d
Connect the player and your TV using an HDMI cable to enjoy high quality digital pictures and
sound through the HDMI OUT jack.
If you connect a Sony TV that is compatible with the “Control for HDMI” (BRAVIA Sync)
function (page 56), refer to the operating instructions supplied with the TV.
If you connect a 1080/24p- or 1080p-compatible TV, use a High Speed HDMI cable.
Notes on connecting to the HDMI OUT jack
Observe the following as improper handling
may damage the HDMI OUT jack and the
connector.
• Carefully align the HDMI OUT jack on the
rear of the player and the HDMI connector
by checking their shapes. Make sure the
connector is not upside down or tilted.
• Be sure to disconnect an HDMI cable when
moving the player.
• If you place the player on a cabinet with an
HDMI cable connected, do not apply too
much pressure to the cabinet wall. It may
damage the HDMI OUT jack or the HDMI
cable.
• When connecting or disconnecting, do not
screw in or rotate the HDMI connector.
Connecting to an HDMI jack
TV
Blu-ray Disc/DVD player
HDMI cable (not supplied)
,
continued